Press Mounted Bullet Puller

[Viper225]

I have no idea how long I have owned my RCBS Collet Puller. I have nearly every collet made for it.

Bob R

[sukivel]

I bought the RCBS and several collets and had tightening problems. A few at a time was ok, but batches of a hundred or so was no good. Sold it and bought the cam over Hornady setup. Much easier and faster...


Sent from my iPhone using Tapatalk

[spfd1903]

Just pulled 900+ lead bullets with the Hornady puller. Very quick. The initial setting to have the collet just above the case mouth is critical. Forster puller works but is much slower. 90% of the boolits were not damaged by the collet.

[gds45]

I use the Hornady Cam-lock. Works very well and is fast.

[Smoke4320]

I had a Bair and the later model RCBS. purchased a Hornady cam over .. used it twice and sold the RCBS and Bair .. Hornady is so so much better

[GONRA]

GONRA has used a Forster and (any brand) inertia bullet puller. Depends on the job.
(Translated, keep struggling until SOMETHING verks OK! Gotta be patient.)

Last pullin' job 2017: Decades Olde Forster Collet, pullin' CORROSIVE 7.62mm Tokarev Czech SMG ammo.
(Gonna reload it. Starline Brass, NCNM primers of course.)

[fast ronnie]

Hornady cam lock. Fast and efficient.