MidSouth Shooters SupplyLee PrecisionInline FabricationRotoMetals2
StainLess Steel MediaTitan ReloadingWidenersGraf & Sons

Page 2 of 2 FirstFirst 12
Results 21 to 25 of 25

Thread: What is 45-45-10

  1. #21
    Boolit Master

    Hamish's Avatar
    Join Date
    Jan 2011
    Location
    Edge of The Crab Orchard National Wildlife Refuge
    Posts
    3,156
    mattw,

    Set the can of JPW in a pot with about 3/4" of water and very gently warm the JPW to liquid, squirt in the little 4 oz. bottle of Alox, stir, and you're done. Let cool.

    No fussing about with cooking things out and squirting things back in. No chance of fire either.

    I used it this way for a couple of years exclusively in everything I shot, approaching 1900fps. The only down side that I've found with it is eventually you need to wire brush the residue out after 100-150 rounds or so to keep accuracy at its best.
    Last edited by Hamish; 08-09-2018 at 04:48 PM.
    More "This is what happened when I,,,,," and less "What would happen if I,,,,"

    Last of the old style Group Buy Honcho's.

  2. #22
    Boolit Master
    Join Date
    Feb 2006
    Location
    The Abyss
    Posts
    409
    I made up a can full a while back, just as Hanish described above. This stuff works great! So far I've been using it on 38, 357, 45 acp, 30-30 and 7.62 x 54R. Fastest I've driven it is 1500 fps in the 30-30 but I'm still working up the load. One coat up to 1000 fps, 2 coats for higher velocity. I put about 100 boolits in a zip-lock plastic bag and add about a half teaspoon of lube, mix it around in my hands for a couple minutes and dump it out on a sheet of waxed paper to dry. Dries in about 24 hours. It doesn't get easier than this! Thanks Hamish!
    "We'll kill them ALL!"

    Optimus Prime at the Battle of Chicago

  3. #23
    Boolit Master
    Tom W.'s Avatar
    Join Date
    Mar 2005
    Location
    Phenix City, Alabama
    Posts
    2,840
    As I've been using Carnauba Red for everything I didn't know Glen had the stuff ready made. I'm not one to fool with cooking stuff that I cannot eat. As of late I've just been using a coat of JPW, sizing and putting a check on my 30 cal boolits, and putting another coat of JPW. So far no problems, but I may have to get a bottle to try. I just don't like LLA.....
    Tom
    μολὼν λαβέ

    Adults are just children with much better toys..

  4. #24
    Boolit Master mattw's Avatar
    Join Date
    Oct 2014
    Location
    East Central Illinois
    Posts
    647
    I do not like the smell of burning LLA, even outside. But, have been testing some bullets in a CZ70 and some of them have come in with some form of LLA, either straight or in a mix and at these velocities and small powder charges I like it. I have never even considered going that route before, but now I am going to try it.

  5. #25
    Boolit Master
    Join Date
    Feb 2006
    Location
    The Abyss
    Posts
    409
    It's simple enough to do; I used an electric hotplate with the heat set at medium-low. It doesn't take much heat to melt the JPW. Opened the can and put right on the hotplate. Once it's liquid I added a full bottle of Lee Alox and stirred it in and shut off the heat. When cool to the touch I popped the lid back on and put it away.

    WARNING JPW is EXTREMELY FLAMMABLE! Do this OUTDOORS - Not inside any kind of structure! Use electric heat, NOT an open flame!
    "We'll kill them ALL!"

    Optimus Prime at the Battle of Chicago

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check