CLOSED - MIHEC 359-125 FB (9mm) Rerun 4 Cav HP or 6 Cav Solid Brass

[gtgeorge]

4 cav HP in .359 with grease groove please gspatton at gttransmisions dot com

[Wasalmonslayer]

All fixed up sir

Thank you!

[Wasalmonslayer]

Got you added sir

Thank you!

[Wasalmonslayer]

4 cav HP in .359 with grease groove please gspatton at gttransmisions dot com

Got you added sir

Thank you!

[galaxy]

Please put me down for:

Hi Tek HP 4 Cavity Brass .357

"just" "2" "purchase" at "gmail" dot "com"

[Wasalmonslayer]

Please put me down for:

Hi Tek HP 4 Cavity Brass .357

"just" "2" "purchase" at "gmail" dot "com"

You are added to the list.

Thank you!

[sailor757]

I'd like a Hi Tek Solid 8 Cavity Aluminum - with handles

It's for a CZ 75B and I will powdercoat the bullets and then size them. What do you say, should I go for .357 or .359 here?

Email: roger dot olsson at gmail (dot ) com -

Cheers,

Roger

[glockfan]

I'd like a Hi Tek Solid 8 Cavity Aluminum - with handles

It's for a CZ 75B and I will powdercoat the bullets and then size them. What do you say, should I go for .357 or .359 here?

Email: roger dot olsson at gmail (dot ) com -

Cheers,

Roger

i picked the .359 for the reason that, i prefer having to resize 2 or 3 thous than having to deal with an undersize boolit ; we're relying of the lead we use,some lead cast smaller,some larger.

since you PC, 357 might be enough,but if ever you use something else,like hi tek,it doesn't add any on the diameter of the boolit

[asmith80]

I went .359 for that very reason

[sailor757]

Thank you.

Will the MP mold drop the .357 bullets somewhat larger as cast? And what diameter can we expect the .359 to drop at?

Sorry if my questions are noob and silly, I'm new to casting.

[sailor757]

Slugged the barrel of my CZ 75B and its indeed only .355.

Please add me to the list for a .357 mould, Hi Tek (no grease grooves) Solid 8 Cavity Aluminum - with handles.

Email: roger (dot ) olsson at gmail (dot ) com

[Wasalmonslayer]

Slugged the barrel of my CZ 75B and its indeed only .355.

Please add me to the list for a .357 mould, Hi Tek (no grease grooves) Solid 8 Cavity Aluminum - with handles.

Email: roger (dot ) olsson at gmail (dot ) com

Hello and sorry for the delayed response been on vacation and reception is very poor!!
I have you added to the list and to answer you question Mihas molds usually cast about 1 thou larger than stated. So in my experience a .357 mold throws .358 bullets with ww and 2% tin.
If you soften in with pure about 50/50 ww to pure with 2% it will throw .3575 bullets.

Hope that this helps.

Have a good day!

[asmith80]

I going to have to back out. Funds have gotten pretty tight, sorry.

Adamjsmith80 at Gmail dot com

[Wasalmonslayer]

No worries buddy! I got you removed.
It happens to me as well....

[denul]

Make mine 8 cavity aluminum,357, plus handles
dennis dot a dot ulrich at gmail dot com

[alicevirgin]

4 cav hp no lube groove at .359, no handles
vincent dot guillen at gmail dot com

[gtgeorge]

#7 on the signup list. Seems you dropped the gspatton at

[Wasalmonslayer]

Make mine 8 cavity aluminum,357, plus handles
dennis dot a dot ulrich at gmail dot com

Got you down
Thank you!

[Wasalmonslayer]

4 cav hp no lube groove at .359, no handles
vincent dot guillen at gmail dot com

Got you down

Thank you!

[Wasalmonslayer]

#7 on the signup list. Seems you dropped the gspatton at

Got you fixed up!
I am very sorry about that....