I am purchasing a 50-70 Frank Garret Sharps carbine and it comes with 120 new brass and the loading dies. What boolit would I need, how much black powder per load and what primer should I use? Any help would be appreciated.
I am purchasing a 50-70 Frank Garret Sharps carbine and it comes with 120 new brass and the loading dies. What boolit would I need, how much black powder per load and what primer should I use? Any help would be appreciated.
Welcome to the forum.
Here is an article, with loading data.
https://www.riflemagazine.com/magazi...d=18&tocid=220
Wow - asking those questions you appear to be a complete novice at reloading black. The basic principle is to fill the case to 1/16"over the base of the boolit, compress, seat boolit, and shoot. Large rifle primers and FFG black to start, but a lot of experimenting ahead of you! The original 50-70 boolit was a 50 caliber 350gr boolit, I have one of the Lyman molds. If you are not set up to cast and lube and size I suggest you look for boolits already cast to start. There are a number of guys here shooting that cartridge - someone will offer some boolits.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |