WTB 12 357 Super Magnum cases

[Mr_Sheesh]

Title says it all. Last cases for the pistol shotshell project, getting close to done on the higher priority project. Not an urgent need, its taking a while, I can use cases that are a little tired, just want ones I can form to fit inside a 357's cylinder and carry a good shot load. Should bre interesting

Thanks all!

[contender1]

Are you asking for 357 Maximum cases?

[evoevil]

whats that, a Maximum

[JimB..]

357 Super Mag is a couple hairs longer than 357 Max, maybe .05 longer. Max was created after Super Mag, probably to avoid paying royalties.

[lightman]

I've got a few 357 Max cases that you can have. I started to send them to you with the 444's but I thought that you had those covered.

[bedbugbilly]

Or you could look at the 360 DW - basically between a 357 mag and 357 Max. I use the 360 DW cases for my 357 Handi rifle as it has a deep throat - they work fine. I have some of the 360DW but I'm in Arizona and the casings are back in Michigan. Take a look at the 360 DW on Starline - it will show you the dimensions/description - can't remember if starling carries the 357 Max or not - you'd have to take a look but if they do, it will give the dimensions.

[Mr_Sheesh]

Any of the above would do me, lightman's cases would be longer than the DW ones. I think I got confused and thought I had it covered too; RL is complex here ATM! I need to finish a couple things and start making progress on others, but the 2 worst problems I sorta need help on & no one local has been available yet. (Physically moving some things I cannot really move alone, may have to get a comealong or something!)