fresh baked jackets ready for tumble/polishing..
im doing these a little different this time around. i did a final anneal after the last draw and i am going to polish them b4 i try to do anything else with them.. they seem to work a lot better when i anneal them after the final draw. trimmer doesn't have to work as hard, cores seat easier as the jacket expands with less pressure, and they point form with less pressure.. also polishing them b4 i try to do anything with them keeps the swage dies cleaner and everything seems to slip easier in the press. also don't have to worry about any problems later down the road with the excess oxide left inside the jackets. never had any problems with the oxide inside of the jacket, just gonna do it this way now.