MidSouth Shooters SupplyStainLess Steel MediaGraf & SonsTitan Reloading
RotoMetals2Lee PrecisionWidenersInline Fabrication

Results 1 to 9 of 9

Thread: .224 cast?

  1. #1
    Boolit Master
    Join Date
    Sep 2017
    Posts
    239

    .224 cast?

    Anyone cast for .224? And push them hard?
    I want to cast for a 5.56 chambered rifle and want to push them in the high 2000 fps range. Seems like a GC boolit that is PC'd might be able to do it?

  2. #2
    Boolit Master

    kungfustyle's Avatar
    Join Date
    Feb 2013
    Location
    Knoxville, TN
    Posts
    760
    I got the RCBS mold for my 223 and I only loose about an 1" at 100 yards. IMR 4198 and CCI primers. Fun to shoot. Over 2000 fps but not high 2000's. I stopped load development at 5 rounds in one hole. Info from Lyman Cast book.

  3. #3
    Boolit Master
    Traffer's Avatar
    Join Date
    Feb 2016
    Location
    Central Wisconisn
    Posts
    1,387
    I think that the .22 Cal. # 90451 C225-55-RF is probably the biggest selling 225 caliber mold out there. I am pretty sure many folks push it over 2000 fps with a gas check and powder coat.
    AKA hans.pcguy

  4. #4
    Boolit Master
    Join Date
    Oct 2017
    Location
    Va. mnts
    Posts
    184
    100$ old flat back 110,22-250,pencil thin brrl. Lee,not bator 55 @2600+.Razor sharp metplat on a "well fitted" CB hits/chunks varmints,HARD.Thin skinned crows end up in 3 or 4 chunks,strewn out a cpl feet.Won't post groups for fear of being called a liar.Slow 12 or 14 twist?Got a new to me R700V 223 with a 12 twist.Where the 110 is for/at in the game fields,am shooting(ha)for target work with longer strings of fire for the 700.Good luck with your project.

  5. #5
    Boolit Master
    Join Date
    Mar 2018
    Posts
    231
    looking for a MP mold to do the same

  6. #6
    Boolit Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    16,521
    Quote Originally Posted by 44Blam View Post
    Anyone cast for .224? And push them hard?
    I want to cast for a 5.56 chambered rifle and want to push them in the high 2000 fps range. Seems like a GC boolit that is PC'd might be able to do it?
    44Blam

    That has been the goal of many, not only in the 5.56 cartridge (.223 Rem also) but many other calibers/cartridges as well. Use the search function and you will find a plethora of information.
    Larry Gibson

    “Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
    ― Nikola Tesla

  7. #7
    Boolit Bub Bulldog71's Avatar
    Join Date
    Apr 2018
    Location
    Garland County, AR
    Posts
    23
    I have been interested in this mold by NOE : 225-51-SP-BA5 3 cavity PB (225450) Just curious if anyone has had any experience with it. Looks to be a nice bullet profile.

  8. #8
    Boolit Master Harter66's Avatar
    Join Date
    Jan 2010
    Location
    90 miles North of Texarkana 9 miles from OK in the green hell
    Posts
    4,229
    NOE 225-55 @62 gr .
    Darrs lube , modified light on Vaseline heavy on STP.
    H322
    2600+ 1" in a 24" Savage 222 1-12"
    2050>< 2.5" in Mossberg barreled 223 16" AR 1-8" nom 3" with factory fmj .
    Same results with NIB Axis with 1-8" 1-1.5 with everything fed to date .

    Harder alloy than my WD 75-25 WW-1/20+copper would probably give higher velocities . I have a great load so development has stopped until I get a heavy for the fast twist .
    In the time of darkest defeat,our victory may be nearest. Wm. McKinley.

    I was young and stupid then I'm older now. Me 1992 .

    Richard Lee Hart 6/29/39-7/25/18


    Without trial we cannot learn and grow . It is through our stuggles that we become stronger .
    Brother I'm going to be Pythagerus , DiVinci , and Atlas all rolled into one soon .

  9. #9
    Boolit Master
    Join Date
    Dec 2013
    Location
    St.Germain, WI
    Posts
    451
    I've been doing just what you thought would work. PC and GC to drive over 2000 fps. I did find that .225 worked better than .224. Doing it in a 9" twist.
    The only amendment the Democrats support is the 5th.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check