10mm 165 TC GC HP

[GoodAlloy]

Well guys how about it? 10 MM at about 165 grs hollow point with gas check option if desired.
That would be about 180 without hollow point?
Maybe Lakehouse would Honcho this one of there was enough intetest?
Should be really accurate as a truncated cone. Gas check option would allow use of Gator check soft alloy and maximum pressure.

[Lakehouse2012]

Well guys how about it? 10 MM at about 165 grs hollow point with gas check option if desired.
That would be about 180 without hollow point?
Maybe Lakehouse would Honcho this one of there was enough intetest?
Should be really accurate as a truncated cone. Gas check option would allow use of Gator check soft alloy and maximum pressure.

Let me look up in the database tonight and see if I can get something you might like.

Sent from my SM-G950U using Tapatalk

[GoodAlloy]

Hey partner I think you uploaded the wrong drawing

[rdwarrior]

Well guys how about it? 10 MM at about 165 grs hollow point with gas check option if desired.
That would be about 180 without hollow point?
Maybe Lakehouse would Honcho this one of there was enough intetest?
Should be really accurate as a truncated cone. Gas check option would allow use of Gator check soft alloy and maximum pressure.

I think that would be a great boolit - would use it in my 40.

[Lakehouse2012]

I have to pass the baton on this one, I have no 10mm or 40's in my collection so I really have no experience here. If you want to guide me, I'd be glad to help. I did however post a new version of a 45ACP in your other thread.

[marlin39a]

I'm interested in a 40 TC, solid, at about 180 gr. And with a GC.

[GoodAlloy]

Attachment 217526

[GoodAlloy]

Something along these lines with GC option and large hollow point ending up about 165 HP with check and lube

[Highland Drifter]

I would be interested in a 40 TC like post #7 with no lube groove for powder coating with a gas check heel with all the usual H.P. pins.

[DukeInFlorida]

GoodAlloy,
If you are needing a HONCHO for this one, I can assist. Since Lakehouse2012 is passing on the opportunity (or at least that is the way I am reading it), and I'm down to one active buy, I would be virtually the only remaining honcho, per our new rules, to handle it. So, if that's good with you, I will do my honest best. The members seem to like the way I do my group buys.

Having said that, hope we can work out the drawing details. Let me know.

[GoodAlloy]

Duke that would be much appreciated

[DukeInFlorida]

Got a confirming PM from GoodAlloy, and I'll be officially running the Discussion, and the resultant Group Buy. The 165 grain boolit weight is my favorite for .40 S&W. I'll share some comments, but need (for the sake of clarity) to start a NEW Discussion thread. Hope that's not confusing.

GoodAlly, could you kindly close your thread, and point it to my new one:
http://castboolits.gunloads.com/show...75#post4386575