CLOSED - MP Mold - 9mm Round Nose 147 grain Competition boolit

[nhyrum]

Would it wreck stuff if I switched mine to smooth side from Lube groove?

Sent from my SM-G930V using Tapatalk

[Lakehouse2012]

No problem my friend! I've taken the liberty of moving you, please look at post #1 and verify for me it's what you want.

Would it wreck stuff if I switched mine to smooth side from Lube groove?

Sent from my SM-G930V using Tapatalk

[nhyrum]

All is correct.

Sent from my SM-G930V using Tapatalk

[nhyrum]

I assume they come with screws to secure them to handles, correct?

Sent from my SM-G930V using Tapatalk

[Lakehouse2012]

I assume they come with screws to secure them to handles, correct?

Sent from my SM-G930V using Tapatalk

Yes, handle screws are included

Sent from my SM-G950U using Tapatalk

[Lakehouse2012]

All Buyers- I made a change to the GB tonight, which serves a greater good here. I had added a GC mold option to the list, and there was only 1 taker for this option, the majority of you want the FB or BB. I have removed the Gas Check option from the GB which will allow Miha to complete the molds in a faster turn-around time for us all. I personally want to thank @Goodalloy for gracefully steping down from his order and allow 2 options to be removed. This means we are needing 2 buyers to get into last call, but will ultimately mean faster machine time for Miha and get these to your door.

I appreciate your understanding, this was a tough call for me,

Thanks,
Lakehouse2012

[evoevil]

Does this come with the Lee style spur plate cutter

[Lakehouse2012]

Does this come with the Lee style spur plate cutter

If you ordered the 8cav aluminum mold, yes it will. Otherwise it comes as a knock bar in the brass version

Sent from my SM-G950U using Tapatalk

[evoevil]

thanks

[GoodAlloy]

Miha has given me the green light, so lets run with it.

- Casting at .358 or .360 (You choose)
- Flat or Bevel base (you choose)
- Steel sprue plate
- Hardened steel alignment pins
- Allen keys are included
- RCBS/Lyman top punch is included
- Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
-Sample of sprue lube is included (15ml)
-NO HP offering here

NEW- Adding a smooth side for Powder or Hi-Tek coating. This will be available in Flat or Bevel Base

Lube groove casts 147gr with WW
Smooth side casts 150gr with WW

Click image for larger version.

Attachment 216689 Attachment 218637


Prices are with shipping included, below.

- 6 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
- 8 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)


GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

UPDATE17APR2018 - I have removed the GC version of this mold, to help Miha only cut one cherry, unfortunately this removes 1 buyer, but I have spoken to Goodalloy and he is ok with this change.

Group Buy List

6 cavity (Brass mold) with (Bevel or Flat base) (state size .358 or .360)
1) worgen(dot)wiki(at)gmail(dot)com - .358 brass six cavity, Bevel base, lube groove set of handles + 2 extra screws for mold handles
2) sorgatz aT Ameritech d0t net - .360 6-cav brass w/groove
3)
4)
5)
6)


8 cavity (Aluminum mold) with (Bevel or Flat base) (state size .358 or .360)
1) kevinXunderscoreXcX1520X@XyahooXdotXcom, no X's - .358 Bevel base, 8 cav aluminum with regular lube grooves
2) toddjarrod17 at yahoo dot com - 8 cavity .358 aluminum bevel base with a set of handles
3)
4)
5)
6)



Solid, Smooth side for Coating with Flat Base (state 6 or 8 cav) (state size .358 or .360)
1) HiVelocity 03 at aol dot com - .360 brass 6-cav smooth side, bevel base
2) Billierudeboy( a )Hotmail - .358 smooth side 8-cav aluminum mold, bevel base
3) hestonhill (at) yahoo.com - smooth side Bevel Base .358 8-cav alum mold
4) keith(dot)kohlruss(at)gmail(dot)com - 6 cav brass, .358 smooth side, Bevel Base.
5) bad22inc (at) gmail (dot) com - 8 cav aluminum smooth side .358 bevel base version. set of handles
6) piotrek (dot) sam (at) gmail (dot) com - .358 8-cav smooth side for coating with bevel base
7) david(dot)nord(dot)eit(at)gmail(dot)com - 6 cav brass, .358 smooth side, Bevel Base
8) gturner121 (@) gmail (dot) com - 6-Cav, solid Brass .358, smooth side, Flat Base one set of handles
9) Hcues1(at)Aol(dot)com - .358 smooth side 8-cav aluminum mold, bevel base
10) jeffgbmold (at) gmail (dotcom) - .358 smooth side 8-cav, aluminum, flat base
11) theangels(at)dodo(dot)com(dot)au - Smooth Side Bevel Base .358 8-cavity alum moulds
12) theangels(at)dodo(dot)com(dot)au - Smooth Side Bevel Base .358 8-cavity alum moulds
13) drgh( at )gmx( dot )net - 6 cav brass, .358 smooth side, Bevel Base plus set of handles
14) Nhyrum(at)gmail(dot)com - 6 cav Brass, .358, bevel base, smooth side.
15)
16)
17)

I understand the cost of the cherries and I'm more than okay with the cancellation of the option.
No harm no foul. let's move on to the next interesting design!! Like maybe the 454190 HP that we are tossing around in the design forum.
Thanks guys!

[nhyrum]

I understand the cost of the cherries and I'm more than okay with the cancellation of the option.
No harm no foul. let's move on to the next interesting design!! Like maybe the 454190 HP that we are tossing around in the design forum.
Thanks guys!

That would be awesome in my 454, requiring a gc. Think I could hit 3k fps?

Sent from my SM-G930V using Tapatalk

[C.Morgan]

Hi,
Can you please add one for me:
- regular lube groove
- casting at .358
- bevel base
- 8 cavitity aluminium mold.

jouni(dot)harhala(at)gmail(dot)com

Thanks a lot!

[Lakehouse2012]

Welcome to the group C.Morgan, I've added you to the buy list.

Thank you!

Hi,
Can you please add one for me:
- regular lube groove
- casting at .358
- bevel base
- 8 cavitity aluminium mold.

jouni(dot)harhala(at)gmail(dot)com

Thanks a lot!

[ChuckJaxFL]

I’m in.

Smooth sides
Beveled base
.360
6 cav brass
Include a set of handles
chuck dot falls at gmail dot com

[Lakehouse2012]

Thank you!! I've got you down. You have put us at 20 and into LAST CALL!!!

I’m in.

Smooth sides
Beveled base
.360
6 cav brass
Include a set of handles
chuck dot falls at gmail dot com

[reddog81]

I'd like to try one of these...
8 Cavity Aluminium, Bevel Base, .358, Regular Lube Groove.

Kredig81 at gmail dot com

[Lakehouse2012]

Sounds good Reddog, I've added you to the list.

Thank you,

I'd like to try one of these...
8 Cavity Aluminium, Bevel Base, .358, Regular Lube Groove.

Kredig81 at gmail dot com

[HiVelocity]

Lakehouse2012-

You're NOT losing it, at least not now, regarding a duplication of my order. My co-buyer convinced his brother-in-law to buy an additional mold to get the
group buy to close and have Miha crank up production, ASAP. So, YES:

one brass 6-cavity smooth side, bevel base, .360 diameter. TIMES 2! Thank you, sir.

HV

[Lakehouse2012]

Excellent! I'm glad your BIL decided to see the light. I've got you down,

Thank you!

Lakehouse2012-

You're NOT losing it, at least not now, regarding a duplication of my order. My co-buyer convinced his brother-in-law to buy an additional mold to get the
group buy to close and have Miha crank up production, ASAP. So, YES:

one brass 6-cavity smooth side, bevel base, .360 diameter. TIMES 2! Thank you, sir.

HV

[Wasalmonslayer]

Go ahead and throw me in on this one please
6 Cav Brass BB .358 Hi Tek

Thank you!