MidSouth Shooters SupplyInline FabricationLoad DataTitan Reloading
RotoMetals2WidenersRepackboxLee Precision
Reloading Everything
Page 1 of 16 1234567891011 ... LastLast
Results 1 to 20 of 318

Thread: CLOSED - MP Mold - 9mm Round Nose 147 grain Competition boolit

  1. #1
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221

    CLOSED - MP Mold - 9mm Round Nose 147 grain Competition boolit

    Miha has given me the green light, so lets run with it.


    20JUNE2018 This GB is now closed, Paypals will be going out shortly.
    WE ARE NOW IN LAST CALL AS OF 19APR2018


    - Casting at .358 or .360 (You choose)
    - Flat or Bevel base (you choose)
    - Steel sprue plate
    - Hardened steel alignment pins
    - Allen keys are included
    - RCBS/Lyman top punch is included
    - Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +$20)
    -Sample of sprue lube is included (15ml)
    -NO HP offering here

    NEW- Adding a smooth side for Powder or Hi-Tek coating. This will be available in Flat or Bevel Base

    Lube groove casts 147gr with WW
    Smooth side casts 150gr with WW

    Click image for larger version.

    Click image for larger version. 

Name:	LakeHouse2012_360-147.jpg 
Views:	408 
Size:	9.3 KB 
ID:	216689 Click image for larger version. 

Name:	9mm_RN_147_2D-Drawing_Sorgatz_24MAY18.jpg 
Views:	242 
Size:	33.4 KB 
ID:	220949Click image for larger version. 

Name:	9mm_RN_147_Screen_Print_Sorgatz_24MAY18.jpg 
Views:	217 
Size:	84.5 KB 
ID:	220950


    Prices are with shipping included, below.

    - 6 Cavity solid Brass 95 Euro's (80,75 Euros with discount)
    - 8 Cavity solid Aluminum 95 Euro's (80,75 Euros with discount)


    GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.

    UPDATE17APR2018 - I have removed the GC version of this mold, to help Miha only cut one cherry, unfortunately this removes 1 buyer, but I have spoken to Goodalloy and he is ok with this change.

    Group Buy List

    6 cavity Lube groove (Brass mold) with (Bevel or Flat base) (state size .358 or .360)
    1) worgen(dot)wiki(at)gmail(dot)com - .358 brass six cavity, Bevel base, lube groove set of handles AND 2 extra screws for mold handles
    2) i v t d i at y a h o o dot com - .358 brass six cavity, Bevel base, lube groove, one set handles
    3) Emrivera1 at gee mail dot com - .358, 6 cavity brass, lube grooves, bevel base
    4) alamogunr AT charter DOT net - .358, 6 cav, Lube groove, Bevel base.
    5) fivegunner-at-sbcglobal-dot-net - .358, 6 cav, lube groove, BB
    6)
    7)
    8)

    8 cavity Lube groove (Aluminum mold) with (Bevel or Flat base) (state size .358 or .360)
    1) kevinXunderscoreXcX1520X@XyahooXdotXcom, no X's - .358, Bevel base, regular lube grooves one set of handles
    2) jouni(dot)harhala(at)gmail(dot)com - .358, w/lube groove, bevel base one set of handles
    3) Kredig81 at gmail dot com - .358, Bevel Base, Regular Lube Groove.
    4) Sdlkkl(@)comcast dot com - . 358, w/lube groove, Flat base
    5)x a v i e r (a) g m x [dot) a t - 8-cavity aluminium, Lube groove, .358, bevel base
    6) starrloader, kdcartridge dot com - 8-cav .360, bevel base with lube grooves
    7) starrloader, kdcartridge dot com - 8-cav .360, bevel base with lube grooves
    8) Kent at Homelogic dot cc. (Yes, Dot cc and not dot com) - .358 ,Alum 8-cav 147, Bevel Base with lube grooves one set of handles
    9) kevinXunderscoreXcX1520X@XyahooXdotXcom, no X's - .358, Bevel base, regular lube grooves one set of handles (second set)
    10) Mcraecp at gmail dot com - 8 cavity .358, Bevel base, regular lube grooves, one set of handles
    11)
    12)
    13)
    14)


    Solid, Smooth side for Coating with Flat Base (state 6 or 8 cav) (state size .358 or .360)
    1) HiVelocity 03 at aol dot com - .360, brass 6-cav smooth side, bevel base
    2) HiVelocity 03 at aol dot com - .360 brass 6-cav smooth side, bevel base (second mold for his buddy)
    3) Billierudeboy( a )Hotmail - .358 smooth side 8-cav aluminum mold, bevel base
    4) hestonhill (at) yahoo.com - .358, smooth side Bevel Base, 8-cav alum mold
    5) keith(dot)kohlruss(at)gmail(dot)com - .358, 6 cav brass, smooth side, Bevel Base.
    6) bad22inc (at) gmail (dot) com - .358, 8 cav aluminum smooth side, bevel base version. set of handles
    7) piotrek (dot) sam (at) gmail (dot) com - .358, 8-cav smooth side for coating with bevel base
    8) david(dot)nord(dot)eit(at)gmail(dot)com - .358, 6 cav brass, smooth side, Bevel Base set of handles
    9) gturner121 (@) gmail (dot) com - .358, 6-Cav, solid Brass, smooth side, Flat Base one set of handles
    10) Hcues1(at)Aol(dot)com - .358 smooth side 8-cav aluminum mold, bevel base set of handles
    11) jeffgbmold (at) gmail (dotcom) - .358 smooth side 8-cav, aluminum, flat base set of handles
    12) theangels(at)dodo(dot)com(dot)au - .358, Smooth Side Bevel Base, 8-cavity alum moulds, one set of handles
    13) theangels(at)dodo(dot)com(dot)au - .358, Smooth Side Bevel Base, 8-cavity alum moulds, one set of handles
    14) drgh( at )gmx( dot )net - .358, 6 cav brass, smooth side, Bevel Base plus set of handles
    15) Nhyrum(at)gmail(dot)com - .358, 6 cav Brass, bevel base, smooth side.
    16) bzajdek attttt hotmail dotttttt commm - .358 bevel base, smooth side, 8 cavity alum.
    17) sven.mac(at)sortkrudt.de - .358, Solid, Smooth side for Coating with Bevel Base 8 cav
    18) Vtech26 at yahoo d0t com - .358, 8-Cav Aluminium, BB, smooth side set of handles
    19) rocpyro at gmail - 8-cav Aluminum, .358 smooth sided, PB set of handles
    20) hparham3 (at) gmail (dot) com - .358, 6 Cavity Brass, Smooth Side, Bevel Base with handles
    21) lrn2drv1 at yahoo dot com - .358, 6-cav brass, Solid, Smooth side with Flat Base with handles
    22) eddy martinez 13 at gmail dot com - 6 cavity (Brass mold), smooth side, (Bevel base) (size .358) with 2 sets of handles - 33027
    23) toddjarrod17 at yahoo dot com - .358 aluminum, smooth side, bevel base with a set of handles
    24) nwegner10 (at) gmail (dot) com - .358", Solid, Smooth side, bevel base - 8 cav
    25) jbpaul AT suddenlink DOT net - .358, 6 cav, brass smooth side, bevel base
    26) jbpaul AT suddenlink DOT net - .358, 6 cav brass smooth side, flat base
    27) rlapid216 at gmail dot com - .358 smooth side, 8 cavity, aluminum, bevel base, with a set of handles
    28)
    29)
    Last edited by Lakehouse2012; 06-20-2018 at 07:14 AM. Reason: adding buyer

  2. #2
    Boolit Bub schemelschelm's Avatar
    Join Date
    Feb 2018
    Location
    Germany
    Posts
    60
    Please put me down for one regular lube groove 8 cavitity aluminum mold, Bevel Base, Dia. 358.

    vefa01-raps (at) freenet (dot) de

    Thanks!
    Last edited by schemelschelm; 03-19-2018 at 08:42 AM.

  3. #3
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by schemelschelm View Post
    Please put me down for one regular lube groove 8 cavitity aluminum mold, Bevel Base, Dia. 358.

    vefa01-raps (at) freenet (dot) de

    Thanks!
    Thank you! I've added you to the list.

  4. #4
    Boolit Bub
    Join Date
    Jul 2017
    Posts
    73
    Dang, I got to get me one of those! Please put me down for a brass six cavity, .358 dia, bevel base, lube groove and a set of handles.

    worgen(dot)wiki(at)gmail(dot)com

    One more thing, could I get two extra screws for the mold handles? I managed to screw one up (no pun intended) on another Miha's mold and can't seem to find a suitable replacement.

    I shall be much obliged!

  5. #5
    Boolit Master

    HiVelocity's Avatar
    Join Date
    Jun 2006
    Location
    SC
    Posts
    803
    HiVelocity - I'm in for one brass 6-cavity smooth side, bevel base, .360 diameter.

    HiVelocity 03 at aol dot com

    HV
    Last edited by HiVelocity; 03-19-2018 at 04:46 PM. Reason: email address
    Life's biggest tragedy is we get old too soon, and wise too late.

  6. #6
    Boolit Buddy DAFzipper's Avatar
    Join Date
    Mar 2008
    Posts
    332
    How much would a Hi-Tek .358 bevel base version weigh?

    Sent from my LG-H700 using Tapatalk

  7. #7
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by Law.man View Post
    Dang, I got to get me one of those! Please put me down for a brass six cavity, .358 dia, bevel base, lube groove and a set of handles.

    worgen(dot)wiki(at)gmail(dot)com

    One more thing, could I get two extra screws for the mold handles? I managed to screw one up (no pun intended) on another Miha's mold and can't seem to find a suitable replacement.

    I shall be much obliged!
    I've got you down for the mold, handles and the extra screws Lawman. Thank you Sir

  8. #8
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by HiVelocity View Post
    HiVelocity - I'm in for one brass 6-cavity smooth side, bevel base, .360 diameter.

    HiVelocity 03 at aol dot com

    HV
    HiVelocity - I put you down, Thanks!!

  9. #9
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by DAFzipper View Post
    How much would a Hi-Tek .358 bevel base version weigh?

    Sent from my LG-H700 using Tapatalk
    Hey DAF- I think your asking the weight of the smooth side version. It will increase 2.5 grains, so should cast 150 with WW. But the reason I put the lube groove so shallow, was to keep the bands on the rifling at the front and rear, but leave the groove so that there isnt TOO much land area in contact. The regular version will Hitek VERY well, you should see some of the conventional grooves that I HiTek, this one is a cake-walk

  10. #10
    Boolit Master
    Join Date
    Sep 2016
    Posts
    2,659
    Sorry, I'm a bit confused. OP says there is a gas check option, or is that supposed to be bevel base? The smooth sided version can be had with and without the bevel? The bevel changes the weight by about how much, please?

  11. #11
    Boolit Mold
    Join Date
    May 2014
    Location
    Sweden
    Posts
    13
    Hi I like to have a solid 8-cavity aluminium mold, .358, bevel base + 2 pair of handles.
    Billierudeboy( a )hotmail

  12. #12
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by kevin c View Post
    Sorry, I'm a bit confused. OP says there is a gas check option, or is that supposed to be bevel base? The smooth sided version can be had with and without the bevel? The bevel changes the weight by about how much, please?
    Sorry for the confusion Kevin, I made corrections to the first post. 1) removed the incorrect text about GC. 2) This GB is for BB by default (147gr), if you want FB it adds 0.7gr to the mass.

  13. #13
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by Billierudeboy View Post
    Hi I like to have a solid 8-cavity aluminium mold, .358, bevel base + 2 pair of handles.
    Billierudeboy( a )hotmail
    Billie- I've added you to the 8 cav regular lube groove version of the mold. If this is NOT what you want, please tell me if you want the smooth side mold and I can modify.

    Thanks!

  14. #14
    Boolit Mold
    Join Date
    May 2014
    Location
    Sweden
    Posts
    13
    I’ll take the smooth sided mold for powdercoating.

  15. #15
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by Billierudeboy View Post
    I’ll take the smooth sided mold for powdercoating.
    Great, I've updated your request. Thanks!

  16. #16
    Boolit Buddy GoodAlloy's Avatar
    Join Date
    Oct 2013
    Posts
    178
    Is gas check an option?

  17. #17
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by GoodAlloy View Post
    Is gas check an option?
    Sorry but not for this one, most wouldn't GC on 9mm, too time consuming. But if others are interested I'll do a design up for a GC version. Let's see who else would like it.

    Sent from my SM-G950U using Tapatalk

  18. #18
    Boolit Master

    Join Date
    Mar 2005
    Location
    Phx Az
    Posts
    1,593
    Quote Originally Posted by GoodAlloy View Post
    Is gas check an option?
    That was my thinking, probably work well in a finicky 38/357 lever gun.

  19. #19
    Vendor Sponsor

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    Holly, Michigan
    Posts
    2,221
    Quote Originally Posted by azrednek View Post
    That was my thinking, probably work well in a finicky 38/357 lever gun.
    I totally agree, this one will work in a 38/357 but i dont think you need to GC. Im running one of my 130 RN that was made for 9mm but i had Miha make it to .360. I dont even have to size, just HiTek and these run on rails...

    Sent from my ME302C using Tapatalk

  20. #20
    Boolit Mold
    Join Date
    Jan 2018
    Posts
    26
    I would like a 6 Cavity solid Brass @ .358, smooth side (no bevel base), and one set of handles.
    gturner121 (@) gmail (dot) com

Page 1 of 16 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check