RotoMetals2Inline FabricationLee PrecisionStainLess Steel Media
WidenersTitan ReloadingGraf & SonsMidSouth Shooters Supply

Results 1 to 20 of 20

Thread: PIF Lyman 450/4500 o rings, and lube die o rings

  1. #1
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276

    PIF Lyman 450/4500 o rings, and lube die o rings

    So I bought a package of the o rings that fit on the rcbs/lyman lube dies and a package of the o rings that go on the pressure, uh...thing, in the lyman 450/4500s. I dont need nearly that many. I was delighted to receive some solder last night so I'd like to hook some guys uo with these to fulfill my obligation.

    Id like to PIF to a lot of people, but it's my opinion that a few o rings doesnt require you pay something else forward. I'll leave that decision to you.

    Heres what I have, post how many of which you'd like and pm me your address-
    32- 13/16" I.D. 1-1/16" O.D. 1/8" Thick BUNA-N Rubber O-Rings
    30- 11/16" OD x 9/16" ID x 1/16"

    Mazo kid- 4 large 4 small
    Beagle333- 4 large
    CITYREPO61- 2 large
    Crandall crank- 4 large 2 small
    Ikarus1- 2 large 2 small
    Virginia John- 2 large 2 small
    BrassMagnet- 4 small
    JohnB_in_Glecoe- 4 large 4 small
    Bazoo- 2 large 2 small
    Sharulady- 2 large 2 small
    Triggerfinger- 2 large 2 small
    Last edited by CraigOK; 04-14-2018 at 10:42 PM. Reason: updating recipients

  2. #2
    Boolit Master
    Join Date
    Aug 2005
    Location
    Near Mazomanie, Wi.
    Posts
    908
    I would claim 4 of each size please. PM coming.
    NRA Life
    NMLRA Life
    F&AM

  3. #3
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,059
    I could use 4 of just the pressure nut rings, please. I have two sizers that could use a ring job. I had bought a pack of the sizer die rings.

    edit: PM sent.

    Much appreciated! Thanks!!!!!
    Last edited by Beagle333; 03-07-2018 at 10:58 PM.
    KE4GWE - - - - - - Colt 1860, it just feels right.

  4. #4
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    Quote Originally Posted by Beagle333 View Post
    I could use 4 of just the pressure nut rings, please. I have two sizers that could use a ring job. I had bought a pack of the sizer die rings.
    sure thing, but pm me your address

  5. #5
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    Plenty more folks...

  6. #6
    Boolit Man



    Join Date
    Apr 2010
    Location
    USA
    Posts
    84
    I'll take a set also please. I'm rehabbing a 450.
    Thanks

  7. #7
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    28 large and 24 small o rings still. Claim some if you need them!

  8. #8
    Boolit Master ikarus1's Avatar
    Join Date
    Jun 2015
    Posts
    174
    I will take 2 of each size. Just got my Lymn 450 up and running and can always use spares. Thanks!

  9. #9
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    Im just sticking these in an envelope to mail them out. I'll try to get them out today for a.yonr whose request is in by 2 cst

  10. #10
    Boolit Master

    Virginia John's Avatar
    Join Date
    Mar 2013
    Location
    West-by-God
    Posts
    319
    This is a nice thing you are doing. Could I please have 2 of each/ Thanks.

  11. #11
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,262
    I can always use some for the dies.
    How ever many you feel like sending would be fine.
    If your source was other than Lyman, I would appreciate that info.

  12. #12
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    16 of each left

  13. #13
    Moderator



    JonB_in_Glencoe's Avatar
    Join Date
    Mar 2010
    Location
    Land of 10,000 Lakes
    Posts
    10,601
    I would like 4 of each.

    I currently don't have any spares...it's always good to have some spares on hand.
    Thank You.

    I will post something later today.
    PM sent.

  14. #14
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    12 of each left

  15. #15
    Boolit Master
    Join Date
    Apr 2014
    Location
    Bartlesville, Ok
    Posts
    276
    I've got these all packaged up and will verify that its not to much weight for a plain old stamp. I'd like to hook some more folks up w/ these so post what you'd like and pm your address.

  16. #16
    Boolit Master Bazoo's Avatar
    Join Date
    Dec 2013
    Location
    Cecilia, Kentucky
    Posts
    1,478
    I'd like to have a 2 of each size, if still available. Thanks, ~Bazoo

  17. #17
    Boolit Master SharuLady's Avatar
    Join Date
    Dec 2011
    Location
    West of St. Louis, Mo.
    Posts
    175
    I would like to have 2 large and 2 small if still available. TY, SharuLady

  18. #18
    I'd like some if you have any left. Very good of you to offer these, thank you!

  19. #19
    Boolit Mold
    Join Date
    May 2011
    Posts
    12
    I could use 4 of each if you still have enough and don't mind.

  20. #20
    Boolit Master poppy42's Avatar
    Join Date
    Apr 2017
    Location
    Virginia
    Posts
    206
    I know I’m kinda late to the game. If you still have any to spare I’ll take 3 large and 3 small, or what ever you can spare. If none are left no problem, better luck next time
    Pm sent
    Last edited by poppy42; 04-12-2018 at 01:46 PM. Reason: Forgot to put pm sent
    Long, Wide, Deep, and Without Hesitation!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check