Looking for a .338 mold. What do you have?
Thanks,
Vince
Looking for a .338 mold. What do you have?
Thanks,
Vince
I have a Lee mold that has cast about 100 bullets. And a Pat marlin 338 checkmaker
Bump,
I use the Lee mold and it works great. At first I had poor results but changed my lube from the RCBS green lube to the White Label Carnuba Red and it made a world of difference.
Depends what weight boolet you have intentions of using. LEE makes a decent mold in the 220-230 gr. range. Accurate molds has a pretty large choice of molds to look at and alter if need be as it is made for you. Probably the most common used and rough rule of thumb is a 230 gr.Robert
Thanks everyone!
I'm going to use these in a 338-06 and want to load light loads. Want to powder coat and do not intend to use gas checks. Anyone tried this?
Thanks,
Vince
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |