I know I saw a post, I thought it was here, about this same topic but couldn't find it, so here goes. I have a RCBS primer pocket swager tool 2 that I have been using on my Lee breech lock challenger press. But the case stripper hits the primer catcher on the side of the press. I recently bought a Lee classic cast press to do heavy work and was gonna use it for PP swaging. However, the case stripper is too small in diameter to fit over the ram on the classic cast press. Does anyone know of a case stripper that will fit on the classic cast press ram? I have contacted RCBS and am waiting for a reply, just thought there maybe someone here who knows, with all the combined knowledge here.