I mentioned previously on a reloading bench photo thread that our original master bedroom is now our "project" room after all the children grew up & left home (many years ago) & we sleep upstairs so we can hear the rain on the metal roof.
Originally I made a reloading bench & a gunsmithing bench from budget type kitchen cabinetry & made my wife a sewing station on the other side of the room from the same type material.
My wife no longer does HD sewing (she once made drapes) & the small amount of sewing that she does now is on a small folding table.
Our youngest daughter (a professional organizer) suggested that I update my reloading bench with my wife's sewing set-up (I think she was really suggesting that my reloading bench was overloaded).
The 1st. two photos are the "before" view.
The 3rd. is the "after" view (completed today).
The new update is lower than the original due to a double window @ the update point, so I ordered 2 In Line Fabrication Ultramounts to get the Redding Ultra Mag press & the Star up to the correct height. I figure that getting the Star off the bench top will also allow me to rig up a chute to direct lubed boolits down to the tray of the Ultramount (we'll see). I'll fab up something to mount the Star on the Ultramount (I actually ordered the 2nd. UM for a Dillon 550).
I want to add a 2nd. 550 (one for LP & one for SP) & will mount it on the left side of the original bench just clearing the left upper drawer.
When I get the other "stuff" & get it mounted, I'll post updated photos.
I welcome any suggestions.
Henry
.................................................. .................................................. ............
A real sport involves either gasoline or gun powder..........all others are just games