I am shooting a NOE 225-55 MX3 grain GC in a 223 XP100 with a 1-12 twist very well. ( 19 grains H 4895/ no filler ) Searching for a rifle now & Ruger comes with a 1-9 twist. Is this twist too fast for my favorite boolit ?
Thanks
I am shooting a NOE 225-55 MX3 grain GC in a 223 XP100 with a 1-12 twist very well. ( 19 grains H 4895/ no filler ) Searching for a rifle now & Ruger comes with a 1-9 twist. Is this twist too fast for my favorite boolit ?
Thanks
The Ruger American Rifles have a 1-8" twist.
My Ruger American likes the 52gr Speer and Berger HP's and 20gr. Rel7, so I don't think you'll have problems with a 55gr boolit once you find the right load. I've found that it is VERY particular about bullet seating depth and prefers them to be seated rather long. I haven't shot any cast through it so no help there.
I've not shot cast in my RAR but I've had no issues with 55gr vmax (sub moa if I do my part). Since its chambered in 556 it does shoot better with the bullets seated long. 1-8" does favor heavier bullets but it should shoot 55gr stuff fine.
I have a RAR with the 1/8 twist. I have been meaning to buy the lee mold for the 55g 224 bullet but never got to it. I have only shot factory ammo I got with the rifle for demo. I decided to keep it for me that is how much I like the little bugger. Still have one box of 55g J points left. If I had some cast I would run it down the pipe for you and give you my results but out of all the molds I have 224 is not one of them. I am sure one of the other guys here can give you the answer you are looking for. But mine is 9mm brass killer at 100 yrds with 55g j words and a 4x16 scope.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |