WidenersInline FabricationStainLess Steel MediaRotoMetals2
RepackboxGraf & Sons

Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: 7/8 by 14 rod with pilot hole needed.

  1. #1
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312

    7/8 by 14 rod with pilot hole needed.

    I would like to tried and make myself a point form die. Could use a short piece of 7/8x14 rod with a 1/16 inch pilot hole

  2. #2
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    9,309
    What alloy? How long?

  3. #3
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    Quote Originally Posted by country gent View Post
    What alloy? How long?
    I am not knowledgeable about alloy and such. Just something hard enough to last, forming 22 cal bullets from 22lr brass.
    I would think no longer then 1 1/4 inch long. Maybe someone else can help .

  4. #4
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    1,844
    a bolt that is the right thread for a press.

    or you could just borrow one of my dies for a little wile and do enough to get you by.

  5. #5
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    Quote Originally Posted by rancher1913 View Post
    a bolt that is the right thread for a press.

    or you could just borrow one of my dies for a little wile and do enough to get you by.
    Thanks for the offer, but brought up not to burrow. Maybe someone can drill me a pilot hole in such a bolt ?
    Last edited by brstevns; 02-14-2018 at 01:08 PM.

  6. #6
    Boolit Master

    rancher1913's Avatar
    Join Date
    May 2015
    Location
    plains of colorado
    Posts
    1,844
    look at btsnipers page, he does a 22simple die set and will sell just the point form. maybe he has a scratch and dent one for cheep.

  7. #7
    Boolit Master
    Join Date
    May 2014
    Posts
    698
    If you use a bolt get at least grade 8.
    QUIS CUSTODIET IPSOS CUSTODES?

  8. #8
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    Can't afford BT sniper. Just something I would like to play around with. Can someone use a bolt and drill the pilot hole for me / what would be the cost ?? PM me if this is possible.

  9. #9
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    bump for Friday

  10. #10
    Moderator Emeritus
    garandsrus's Avatar
    Join Date
    Jan 2006
    Location
    Warren, MI
    Posts
    2,412
    Why do you need the hole drilled? If you have the tools to make the point form die, drilling the hole shouldn’t be a problem. It would in fact be better to drill the hole and finish the rest of the point form die without removing it from the lathe to keep everything concentric.

  11. #11
    Boolit Master
    Traffer's Avatar
    Join Date
    Feb 2016
    Location
    Central Wisconisn
    Posts
    1,533
    The best thing to do is learn how to make a centered hole. You can buy good bolts on eBay for making dies for cheap. 10 bolts for $15
    AKA hans.pcguy

  12. #12
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    don't have a lath, must do my work with hand tools. Hand ream etc. once I have a centered pilot hole.

  13. #13
    Boolit Master

    nicholst55's Avatar
    Join Date
    Jan 2007
    Location
    Daegu, Korea
    Posts
    2,853
    Boycott YouTube

  14. #14
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Edwardsville, IL
    Posts
    1,596
    How close are you to STL? I am in Edwardsville.
    Looking for an RCBS A2 with the removable bushing. I need it to complete my A series collection. Please let me know if you have one you want to get rid of. Thanks!

    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  15. #15
    Boolit Master
    Traffer's Avatar
    Join Date
    Feb 2016
    Location
    Central Wisconisn
    Posts
    1,533
    I don't think it even needs to be centered perfectly. Try just drilling a hole as close to center as you can and reaming a point forming die for yourself ...it would be good practice if it didn't work. That's how I learned to do stuff. Just tried ... no lathe but make my own dies.
    AKA hans.pcguy

  16. #16
    Boolit Master
    Traffer's Avatar
    Join Date
    Feb 2016
    Location
    Central Wisconisn
    Posts
    1,533
    AKA hans.pcguy

  17. #17
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Edwardsville, IL
    Posts
    1,596
    It doesnt have to be centered if your punch can float a bit.
    Looking for an RCBS A2 with the removable bushing. I need it to complete my A series collection. Please let me know if you have one you want to get rid of. Thanks!

    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  18. #18
    Boolit Buddy

    Join Date
    Jul 2014
    Location
    39.7594 N, 84.1917 W
    Posts
    467
    Quote Originally Posted by brstevns View Post
    I would like to tried and make myself a point form die. Could use a short piece of 7/8x14 rod with a 1/16 inch pilot hole
    How long of a piece do you need? How long is a short piece?

    I have a lathe and can setup and do this without issue, I'll just have to get the material. Will all thread work or does it have to be harder?

    let me know.
    Scott

    You can easily judge the character of others by how they treat those who they think can do nothing for them.

    38 Super - DOB 02/06
    Commander - DOB 02/12
    Delta Elite - DOB - 1989

  19. #19
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    want to thank everyone for their help.

  20. #20
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    Near St. Louis MO
    Posts
    2,312
    I want to send out a Big Thanks to garandsrus . He made me up not one but two pieces of rod. One to practice on , guess he knew I might have problems . Thanks again garandsrus for your help and kindness.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check