RotoMetals2MidSouth Shooters SupplyTitan ReloadingLee Precision
Inline FabricationGraf & SonsADvertise hereStainLess Steel Media

Results 1 to 5 of 5

Thread: Paper Patching with oven Paper

  1. #1

    Paper Patching with oven Paper

    Helo Everyone,

    I want to load my .45-70 marlin I bought in the 1980s with a black powder load.I plan to paper patch it and was woundering if this paper they sell for baking things in the oven could be a good choice.

    This is probably going to be a one time deal, just for the heck of it. Any problems using standad loads for a jacked bullit for a cast boolit? 405gr. I wont be loading it to the max. Probably a medium Load.

    Thanks

    Greg

  2. #2
    Boolit Master
    Join Date
    Jan 2013
    Location
    The Mitten
    Posts
    172
    i don't think parchment paper would make a very good patch based on my patching experince i have had good luck with standard 20# copy paper but have moved to 9#, my first experiments with paper patching were with standard copy paper i like to patch wet let dry lube the patch with lanolin and bees wax mix and then run the bullet through a push through sizer

    as you are just starting out i recommend using your lever gun as a single shot as the loading of the magazine and the cycling into the chamber can be hard on the patch and since your just getting started i wouldn't add anymore extenuating factors than i had to

    as far as loading with black you will need to used brass with annealed necks in order to get a proper gas seal and you will need to thoroughly clean the gun when you are finished not just the barrel but the action as well i played with some bpcr loading when i got my 45-90 1895 i quickly decided if the gun can handle smokeless loadings those are my preferred loadings

    if you are planing to seat the bullet into the rifling undersized and have it bump you will need to use very soft alloy or pure lead, i used paper patched pure lead cup point bullets deer hunting this year at 1700fps out of my marlin guide gun and found them to be very accurate also i have only ever used standard grease groove bullets for patching as i have never gotten around to acquiring a straight sided pp mold but also haven't found the need

  3. #3
    Boolit Master
    Join Date
    May 2012
    Posts
    1,453
    Not commenting.
    "JUST A OLD DEPLORABLE THAT'S IRREDEEMABLE."

  4. #4
    Boolit Master Dan Cash's Avatar
    Join Date
    Jun 2008
    Location
    Western North Dakota
    Posts
    2,675
    I shoot a Marlin 1895 strictly with black powder but use grease groove bullets. 50 rounds with only blow tubing works for leveraction matches. For hunting, the one or two shots you will take makes grease groove bullets a practical choice and blow tubing not needed. For the velocity at which .45-70 works with black or smokeless powder, paper patching does not seem practical.

    That said, I do paper patch .30-40 and .30-30 ammo for general purpose as I get good accuracy with no leading with soft bullets at 1800 to 2400 fps. No problems with lever guns feeding or damaging the patches.

    I do not think that oven/baking parchment will work very well for patching as it is pretty heavy and does not stick to its self well. A standard tracing paper works much better. You can get a pad for 2 or 3 bucks at Wally World or a craft store.

    Good luck and have fun.
    To paraphrase Ronald Reagan, the trouble with many shooting experts is not that they're ignorant; its just that they know so much that isn't so.

  5. #5
    Use Alliant Black. I can shoot 20 from my 45-70 with no loss of accuracy. Then one smokeless round gets it 80% clean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check