Titan ReloadingLee PrecisionRotoMetals2MidSouth Shooters Supply
StainLess Steel MediaInline FabricationGraf & SonsADvertise here

Donate Now Goal amount for this year: 6000 USD, Received: 4840 USD (81%)
We have reached our goal! Thanks to all who donated! I will be updating the donation bar in the next few days!
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****

Results 1 to 4 of 4

Thread: NOE copy of the Saeco 315

  1. #1
    Boolit Master waco's Avatar
    Join Date
    Jan 2009
    Springfield, Oregon

    NOE copy of the Saeco 315

    I loaded these in LC .308 brass that was annealed then FL sized and trimmed to 2.005
    Boolits checked and lubed weigh 181gr. Lars 2500+ lube in the bottom two grooves only. They also got an overcoat of BLL. The boolits were heat treated to a bhn of 20.

    44.3gr of IMR4831 gave an average MV of 2180fps with a SD of 10.64
    CCI large rifle primers were used. The group was fired at 100 yards laying prone out of the bed of my pickup using a bipod and a rear bag.
    The rifle is a Rem 700 with a heavy 22 battle with a 1:10 twist.
    Click image for larger version. 

Name:	A128F208-7A7D-4305-8DAC-BE034224F577.jpg 
Views:	10 
Size:	44.0 KB 
ID:	214081
    The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
    Proverbs 1:7

  2. #2
    Boolit Master 35 shooter's Avatar
    Join Date
    Jul 2013
    collins ms.
    Very nice cast boolit shooting.
    I have that very boolit in both pb and gc. Very accurate in my .308 mauser, but with one minor problem lol.....the mauser doesn't want to feed it from the mag. no matter if it's seated out long or short.

    Oh well, shoots great when i single feed them on top of the ramp.

    That's some good speed you got with that boolit in your 10 twist ....NICE!

  3. #3
    Boolit Master
    Join Date
    Jan 2018
    Northern MN
    Yes, very nice indeed. "See that fly on yonder mesa?"

  4. #4
    Boolit Master
    Join Date
    Mar 2012
    SoCal, USA
    That is the same boolit I use. I started with a 5 cav aluminum PB mold and then got a 2 cav brass GC mold for the casting machine I built. That is what I use for the win 94 30-30 to shoot silhouettes and in the win 54 30-06 for plinking.

    That is some great shooting and a very nice group.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check