Titan ReloadingRotoMetals2Graf & SonsStainLess Steel Media
Inline FabricationLee PrecisionMidSouth Shooters SupplyADvertise here

Page 2 of 2 FirstFirst 12
Results 21 to 36 of 36

Thread: Dillon xl650 kinda sucks...

  1. #21
    Boolit Master


    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    2,530
    Quote Originally Posted by lightman View Post
    I don't have a 650 but I've been very happy with my 550. The 650 that I used was a nice tight precise machine.
    Lightman,
    The 550 is no slouch and one of the best. I used to have two 1050’s and still kept the 550. It is perfect for smaller runs and for someone who wishes to use a progressive to load a lot of different calibers as the conversion kits are less expensive.

    I sold one of the 1050’s as well as a 650 and a Star when I downsized and picked up another 550.

    There are two downsides to the 550. One is that in order to add a powder check it is necessary to seat and crimp in one die...that is how the old Star operated. The second is that it does not autoindex. I believe autoindexing adds to the safety of operation as it makes double charging less likely when running something like .38, .357, 44 Mag .45 LC etc. The Star had a safety cam to prevent double charging. Having said all that, I still replaced three “better/faster” presses with a 550 when my needs changed.

    If you ever upgrade, keep the 550. You will not regret it.
    Don Verna

    NRA Endowment Member

  2. #22
    Boolit Bub
    Join Date
    Dec 2017
    Location
    Farmerville,Louisiana
    Posts
    21
    I’m in my 3rd year with this Dillon 650, the no BS warranty hasn’t worked yet, cause I can’t get this thing to break. Haven’t mistreated it at all, kept it lubed, clean,just keeps running. That really sucks cause i like to fix things, have tons of tools left over from working for 40+years and don’t get to use on this thing. Ran .223 for first year, then 9MM for rest of time, haven’t had to go to large primer system yet think that is where I can have a little more fun. Keep an old RCBS single stage for testing,as for the Dillon just feed powder, primers, and boolits and crank out ammo.

  3. #23
    Boolit Master
    Baja_Traveler's Avatar
    Join Date
    Mar 2010
    Location
    San Diego, CA
    Posts
    963
    Well, to be honest my 650 did suck when the whole danged primer tube detonated and blew up sending the low primer follower impaled into the ceiling with shrapnel of charred primers. Thankfully the outer containment tube did its job, so no other damage to the press - and Dillon replaced everything back to new. Never did figure out what actually caused it. Ended up selling that press to my Boss when the big ammo shortage hit as I don't really do high production runs and my 550B does just fine (and I needed the cash for a Shilo Sharps rifle I really wanted). He's been using it for years now with no issues.
    Took a hammer and a punch to extract the primer tube, but here is the end result:
    Click image for larger version. 

Name:	146371058.fXyZHWQ3.jpg 
Views:	23 
Size:	99.5 KB 
ID:	214178

  4. #24
    Vendor Sponsor
    Join Date
    Jan 2009
    Location
    Cincinnati
    Posts
    116
    I like the one that is already painted in red to alert you that something bad may happen and also wakes you up once in a while when a primer goes bang. Plus the added safety feature of having primers installed sideways or completely missing makes these presses machines that finally produce SAFE AMMO. They are a great seller in California!
    NRA Certified Pistol Instructor
    NRA Certified Chief Range Safety Officer
    NRA Life member
    email: info@primercatcher.com
    www.primercatcher.com

  5. #25
    Boolit Buddy
    Join Date
    Mar 2005
    Location
    Alabama Gods land
    Posts
    68
    Quote Originally Posted by Drew P View Post
    I like fiddling. And Iím not rich. So, thatís not the press for me. Glad you like it. Save me the click bait though.
    I have learned the hard way : buy once cry once. The Dillons just plain work. No bs

  6. #26
    Boolit Man


    Join Date
    Jun 2013
    Location
    Vermont, below the libs
    Posts
    94
    My kids, all in their 30's, have enjoyed both loading on my 650 and shooting up the ammo it has produced. They also gift me tool heads with stands and powder measures or caliber change over kits for birthdays or Christmas. When I commented on them being pricey, the response was," They're an investment." Shrewd or what? Someday this will be theirs. Dave

  7. #27
    Boolit Master


    Join Date
    Oct 2009
    Location
    Northern Michigan
    Posts
    2,530
    Quote Originally Posted by JRPVT View Post
    My kids, all in their 30's, have enjoyed both loading on my 650 and shooting up the ammo it has produced. They also gift me tool heads with stands and powder measures or caliber change over kits for birthdays or Christmas. When I commented on them being pricey, the response was," They're an investment." Shrewd or what? Someday this will be theirs. Dave
    You raised smart ones!
    Don Verna

    NRA Endowment Member

  8. #28
    Boolit Buddy
    Join Date
    May 2016
    Location
    West Central MN
    Posts
    55
    Quote Originally Posted by JRPVT View Post
    My kids, all in their 30's, have enjoyed both loading on my 650 and shooting up the ammo it has produced. They also gift me tool heads with stands and powder measures or caliber change over kits for birthdays or Christmas. When I commented on them being pricey, the response was," They're an investment." Shrewd or what? Someday this will be theirs. Dave
    well played.

  9. #29
    Boolit Master
    Join Date
    Nov 2010
    Posts
    4,427
    Quote Originally Posted by Big Tom View Post
    I like the one that is already painted in red to alert you that something bad may happen and also wakes you up once in a while when a primer goes bang. Plus the added safety feature of having primers installed sideways or completely missing makes these presses machines that finally produce SAFE AMMO. They are a great seller in California!
    Never produced anything good from something that was painted red. Also, 45+ years of reloading and never had a primer go bang when reloading.

  10. #30
    Boolit Master 1bluehorse's Avatar
    Join Date
    Oct 2009
    Location
    Washington
    Posts
    923
    You guys should all get in a big circle...

  11. #31
    Boolit Master Drew P's Avatar
    Join Date
    Nov 2015
    Location
    NW USA
    Posts
    587
    Quote Originally Posted by 1bluehorse View Post
    You guys should all get in a big circle...
    And then what? Oh ya, brag about the blue hue that our reload rooms give off?
    You know what else comes in blue? KOOLADE
    Last edited by Drew P; 02-15-2018 at 12:40 AM.

  12. #32
    Boolit Master lead chucker's Avatar
    Join Date
    Jan 2010
    Location
    Alaska
    Posts
    655
    I like my 650. I have replaced a few springs in it. Keep it cleaned and lubed and works great. Just got a 45 acp conversion kit for it. Been loading a lot of 9mm to feed my hungry Keltec sub 2000. Its sits proudly next to my Rock chucker.
    Dont pee down my back and tell me its raining.

  13. #33
    Boolit Master
    Join Date
    Nov 2010
    Posts
    4,427
    Some people don't seem to understand that if you buy quality you seem to buy only once and that product lasts. Sure, you can buy something painted red and if used properly and gingerly it might last a few years before its potmetal frame cracks and breaks. I learned a quick lesson when I was growing up watching my father purchase something. He would purchase the cheapest and then be unsatisfied and after a few years it would break and maybe he would purchase the item he actually wanted in the first place. The result was of course more money spent.

    My suggestion is you purchase a product that is blue in color has a no BS warranty and will last thru your lifetime and the person you will it to after your death. Dillon presses are **** because they work and they have a decent warranty.

  14. #34
    Boolit Master






    Lloyd Smale's Avatar
    Join Date
    Mar 2005
    Location
    munising Michigan
    Posts
    13,322
    Lee does make decent jeans
    Soldier of God, sixgun junky, Retired electrical lineman. My office was a 100 feet in the air, closer to God the better

  15. #35
    Boolit Master
    Join Date
    Nov 2010
    Posts
    4,427
    I learned the hard way by purchasing a hand primer setup years ago that broke and broke and broke. Then it was the dies I tried that were poorly made and then the press tht I tried that belonged to a friend. This was enough to point me in another direction and away from Lee.

    I'll pass on the Jeans too.

  16. #36
    Boolit Master






    Lloyd Smale's Avatar
    Join Date
    Mar 2005
    Location
    munising Michigan
    Posts
    13,322
    hands down the best upgrade from a single stage press that was ever designed. If I had to get rid of every press in the loading room and could only keep one my choice would hands down be a 550.
    Quote Originally Posted by lightman View Post
    I don't have a 650 but I've been very happy with my 550. The 650 that I used was a nice tight precise machine.
    Soldier of God, sixgun junky, Retired electrical lineman. My office was a 100 feet in the air, closer to God the better

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check