Making that Bullet Collator

[J. DIEGO]

With this infrared if you can lengthen with cables?

[AmmoMike83]

With this infrared if you can lengthen with cables?

It’s not infrared. It’s visible light.

[J. DIEGO]

The good thing about this switch is that it already has the built-in relay!: razz:

[J. DIEGO]

I have it in amazon this switch, but it seems like an armed robbery
that costs € 18, roughly 20 usd

[AmmoMike83]

I have it in amazon this switch, but it seems like an armed robbery
that costs € 18, roughly 20 usd

Link please. Euro is ok. I am from Germany. We have that here too

[J. DIEGO]

https://www.ebay.es/itm/KEMO-B045-Li...sAAOSwZW5aBCok

I just located on ebay for this price

[J. DIEGO]

Amazon
https://www.amazon.es/Interruptor-fo...ords=Kemo+B045

[AmmoMike83]

https://www.ebay.es/itm/KEMO-B045-Li...sAAOSwZW5aBCok

I just located on ebay for this price

That's a good price. Read the instructions carefully! You can build it in two ways, normally open (NO) and normally closed (NC). If there is light, the relais must be closed, not otherwise round!

[J. DIEGO]

Well if you tell me that it is a good price and I can extend the distance with cable --- then I will order two, one for my star lube and another one for my loadmaster !!

[AmmoMike83]

Well if you tell me that it is a good price and I can extend the distance with cable --- then I will order two, one for my star lube and another one for my loadmaster !!

I have the same up and running, watch:
https://www.youtube.com/watch?v=sH80AcEvQGM

[J. DIEGO]

Well if you tell me that it is a good price and I can extend the distance with cable --- then I will order two, one for my star lube and another one for my loadmaster !!

[J. DIEGO]

By the way recently finished!

[AmmoMike83]

By the way recently finished!

Nice print, ugly color What kind of bullets are this?

[J. DIEGO]

That won't work. Tell me if you have found a switch with an operating force of 0.01 N and send me the article number and vendor.

Dillon has this accessory and it should work, if he does it with the pods
With lead bullets there should be no problems.

http://www.topgun-a.com/maquinas-de-...a-vainas-tolva

[J. DIEGO]

Nice print, ugly color What kind of bullets are this?

The bullets that appear in the photos are 32wc for my Pardini hp

[AmmoMike83]

Dillon has this accessory and it should work, if he does it with the pods
With lead bullets there should be no problems.

http://www.topgun-a.com/maquinas-de-...a-vainas-tolva

Hard to say without a datasheet.

[AmmoMike83]

The bullets that appear in the photos are 32wc for my Pardini hp

You know that you can't sort WC bullets in a bullet feeder?

[J. DIEGO]

You know that you can't sort WC bullets in a bullet feeder?

If I know, this feeder is for 9mm and for 38
Although maybe you could create a feeder based on this;

https://www.youtube.com/watch?v=4xXDZ0E4DU4&t=13s

[J. DIEGO]

And also this other piece would be needed !!
https://www.youtube.com/watch?v=gw0VdRcZrpA

[AmmoMike83]

If I know, this feeder is for 9mm and for 38
Although maybe you could create a feeder based on this;

https://www.youtube.com/watch?v=4xXDZ0E4DU4&t=13s

Casefeeder. hm... There are easier designes based on weight difference between base and case mouth. Maybe a future option. Have enough to do with answering question atm with the bullet feeder

And also this other piece would be needed !!
https://www.youtube.com/watch?v=gw0VdRcZrpA

there is a better design from jmorris. Not rotating parts. I adapted it you can download it on thingiverse.
https://www.youtube.com/watch?v=oqjjiKPX5iQ