A older friend is liquidating some equipment do to issues. I put the "Ill take it" on several today. A 13 X 40 lathe. A series 2 Bridgeport with
9X42 table. Both machines come with a lot of tooling and needed equipment.
The lathe has 3 jaw and 4 jaw chucks D1-4 spindle 3 moarse taper collets steady rest follower rest dead centers live centers readout on X and Y aloris tooling several holders, lantern type post, coolant, a ball radious turning attachment, and some other odds and ends. He bought the lather roughly 6 years ago new.
The Bridgeport Mill is the dovetail ram series 2 variable speed head, 9" X 42" table. Bridgeport power feed unit on x and y, digital read out on X and Y axis. r-8 collets to 1" Weldon holders, rotary table with tailstock, dividing head with tail stock, 6" kurt angle lock vise and a 6" Bridgeport vise. both have swivel bases under them. Standard drawbar. 2 HP head. Several sets of parallels 2 set of accessory clamps ( studs straps and adjustable blocks ) a vise lift, boring heads a bridge port and forieghn made one. Table is clean no cuts or holes pattern still shows same with ways scraping pattern is crisp and clean. It also has the old style handles that don't have to be held tight to engage just held in. All 4 bolts on the swivel are good so no broken spider there.
Now to find a good 6X18 surface grinder and a 24"-36" shaper. I already have a small 36" wood lathe that's been converted to a buffing machine with 3 cotton wheels and a sisel wheel on it. Allows red green and white rouge with out changing wheels. A couple drill presses ( wouldn't turn down a good gear head drill press with reverse though).