Inline FabricationMidSouth Shooters SupplyRotoMetals2Repackbox
Load DataTitan ReloadingLee PrecisionWideners
Reloading Everything
Results 1 to 13 of 13

Thread: identify this for me...

  1. #1
    Boolit Mold
    Join Date
    Feb 2018
    Location
    Toms River, NJ
    Posts
    4

    identify this for me...

    this came with some reloading equipment I recently purchased. It was included with a bullet mould, but I've never done any moulding and need to pick your brains.
    Attached Thumbnails Attached Thumbnails castboolt2.jpg   castboolit1.jpg  

  2. #2
    Boolit Master


    Taylor's Avatar
    Join Date
    Jul 2006
    Location
    Tennessee
    Posts
    1,767
    Don't have a clue. Maybe we can make something out of it.
    Pro Patria-Ne Desit Virtus

  3. #3
    Vendor Sponsor

    Smoke4320's Avatar
    Join Date
    Apr 2013
    Location
    Right here ..at least I was a minute ago
    Posts
    5,046
    Its a kerfunkle deglobulator ...sorry it was in my head ...tag its on you now
    now about the part haven't a clue but will be watching .. interesting
    [SIZE=4][B]Selling Hi Quality Powdercoating Powder

    I carry a Nuke50 because cleaning up the mess is Silly !!

    http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH

    I am not crazy my mom had me tested

    Theres a fine line between genius and crazy .. I'm that line
    and depending on the day I might just step over that line !!!

  4. #4
    Boolit Master
    Join Date
    Dec 2016
    Posts
    1,091
    I believe the second piece is to use Lyman Tru-Line dies in a larger threaded press, the other item I could just throw out a WAG, maybe part of a shotshell reloader crimp starter insert holder?

  5. #5
    Boolit Master
    Join Date
    Mar 2016
    Location
    the south end of northern Virginia
    Posts
    1,121
    The part on the left is a muzzle break for a high standard supermatic series.22 target pistol.

  6. #6
    Boolit Mold
    Join Date
    Feb 2018
    Location
    Toms River, NJ
    Posts
    4
    I believe you are correct sir...Click image for larger version. 

Name:	muzzlebreak.jpg 
Views:	103 
Size:	67.6 KB 
ID:	213659

  7. #7
    Boolit Grand Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    6,073
    Both are correct! You beat me!

  8. #8
    Boolit Grand Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    5,513
    Not to depart too far from the intended thrust of this forum, that High Standard muzzle break is quite collectible. In the halcyon days of Bullseye Pistol Competition, they were quite popular for a while, and could be found fitted to the “Space Gun” barrels as shown in this thread, the fluted barrels favored by some, and even the ubiquitous bull barrels. If you wish to find a home for it, you might want to post a picture on the Rimfire Central Forum.

    To return to the purpose of this forum, the threaded bushing is handy if you wish to go back and forth between a 310 Tool and a standard press while using the same dies... it was also commonly packed with the Model 55 Powder Measure so [I]it[I] could be mounted on a standard press as well.

    Froggie
    "It aint easy being green!"

  9. #9
    Boolit Grand Master

    gwpercle's Avatar
    Join Date
    Sep 2011
    Location
    Baton Rouge, Louisiana
    Posts
    9,251
    Muzzel Brake..... OK , just exactly what screws onto the two threaded arms sticking out at angles to the brake . I can't find any info on what they are for...any ideas as to what they are for?
    Certified Cajun
    Proud Member of The Basket of Deplorables
    " Let's Go Brandon !"

  10. #10
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    Are they the set screws that hold it on the bull barrel?
    Ken

  11. #11
    Boolit Grand Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    5,513
    All of the barrels I mentioned had the precise same OD and a pair of divots at 3 and 9 o'clock. The screws about which you ask locked into those notches and held the muzzle brake in place. The brake came with a sheet steel item that looked like a big old fashioned key... its function was to scrape the lead out of the chamber of the brake. In those days of shooting thousands of rounds per season, the lead buildup could be pretty heavy.

    Froggie
    "It aint easy being green!"

  12. #12
    Boolit Buddy Went2kck's Avatar
    Join Date
    Nov 2014
    Location
    overland park KS
    Posts
    226
    I use to have one of them high standard pistols. A fine shooting pistol it was. I was stolen from trunk of car.

  13. #13
    Boolit Master

    Join Date
    Dec 2014
    Location
    UPSTATE new york
    Posts
    1,722
    WOW good eye

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check