ADvertise hereMidSouth Shooters SupplyTitan ReloadingGraf & Sons
Inline FabricationLee PrecisionRotoMetals2StainLess Steel Media

Page 1 of 4 1234 LastLast
Results 1 to 20 of 77

Thread: Mihec 45-70 "Keith styled" 400 gr HP SWC

  1. #1
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351

    Mihec 45-70 Keith styled 400 gr HP SWC

    Miha has given me the green light, so lets run with it.

    - Casting at .460 or .462 (You choose)
    - Flat base or Gas Check (you choose)(Smooth side only in FB)
    - Steel sprue plate
    - Hardened steel alignment pins
    - Allen keys are included
    - RCBS/Lyman top punch is included
    - Use MP mold handles or LEE 6 cavity handle (NOT included but you can add for an +20 Euro)
    -Sample of sprue lube is included (15ml)
    -Pins will be large round, like shown in the mold and large Penta pins. 2 sets total.

    NEW- Adding a smooth side for Powder or Hi-Tek coating. This will be available in Flat Base only name your mold type

    All of the details should be in the drawing below, If you see something to be modified, I can tweak. But I believe this is going to be a tack-driver at 100 yards!

    WW's using HP is 405 gr.
    Pure lead using HP is 417 gr.
    Solid (no pins) using pure is 436 gr.
    Solid (no pins) using WW's is 423 gr.

    Click image for larger version. 

Name:	LakeHouse2012_45-70-400_GCHP.jpg 
Views:	72 
Size:	14.3 KB 
ID:	213604 Click image for larger version. 

Name:	LakeHouse2012_45-70-400_GCHP_404_gr_Sketch.Jpg 
Views:	145 
Size:	142.9 KB 
ID:	213606

    Prices are with shipping included, below.

    - 2 Cavity HP all pins included 95 Euro's (80.75 Euros with discount)
    (pins will be large round, like shown in the mold and large Penta pins. 2 sets total.)

    - 4 Cavity solid Brass 95 Euro's (80.75 Euros with discount)
    - 6 Cavity solid Aluminum 95 Euro's (80.75 Euros with discount)


    GROUP BUY DISCOUNT OF 15% PERCENT GIVEN AT TIME OF INVOICE

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... Invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Please list your e-mail address in suitable form and the number and version (brass or aluminum) of molds you want.


    Group Buy List -

    2 cavity (Brass mold) HP with (Gas Check or Flat base) (state size .460 or 462)
    1) fjruple at comcast dot net - 2 cavity flat base in .462 with all of the pins.
    2) dcw038 at msn dot com - .460 HP GC, with all pins
    3) shutupandjump at yahoo dot com - .462 HP GC with handles
    4) wonderwolf at gmail dot com - .460 HP GC, all the pins
    5) Philo187 AT yahoo DOT com - .462 HP GC , all pins and handles
    6) gandy dancer at sw va dotnet - .460 HP GC with all pins
    7) gandy dancer at sw va dotnet - .460 HP GC with all pins
    8) p d a n 2 9 9 3 at g to the mizail dosky comsky - .460 HP GC w/ all pins
    9) evoevil ...... AT ...... aol .... Dot....com - .460 HP GC w/all pins
    10) Amadaus 101 at outlook dot com - .462 HP GC w/all pins
    11) thomasherron2 at gmail dot com - .460 HP GC w/all Pins +w/handles
    12) rockyert68 at yahoo dot com - .462 HP GC w/all pins
    13) sailingtoo @ gmail dot com - .460 HP flat base, with all pins AND HANDLES
    14) zymguy at g mail dot com - 462 flat base brass all pins

    4 Cavity (Brass mold) Solid with (Gas Check or Flat base) (state size .460 or 462)
    1) mjcrookston at msn dot com - .462 with GC with handles
    2) sorgatz at ameritech d0t net - .460 with GC
    3) hang fire w8 atatat gmail d0t com - .462 PB with handles
    4) greggoryashley at yahoo dot com - 4 cavity brass 462 plain base
    5)
    6)

    6 Cavity (Aluminum mold) with GC or PB (state size .460 or 462)
    1)
    2)
    3)
    4)
    5)
    6)

    Solid, Smooth side for Coating with Plane Base(state size .460 or 462)
    1)
    2)
    3)
    4)
    5)
    6)
    Last edited by Lakehouse2012; 04-15-2018 at 12:44 AM.

  2. #2
    Boolit Master
    Join Date
    Dec 2016
    Posts
    150
    .462 gc 2 cavity hp with all the pins ect with handles

    ajtaylor151 at gmail dot com

  3. #3
    Boolit Master
    Join Date
    Dec 2016
    Posts
    150
    Is he going to add his penta pins too?

  4. #4
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by Fastleo View Post
    Is he going to add his penta pins too?
    Yes, pins will be large round, like shown in the mold and large Penta pins. 2 sets total.

  5. #5
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by Fastleo View Post
    .462 gc 2 cavity hp with all the pins ect with handles

    ajtaylor151 at gmail dot com
    Thanks FastLEO- I have you down!

  6. #6
    Boolit Master
    Join Date
    Dec 2016
    Posts
    150
    I’m betting this bullet is very accurate

  7. #7
    Boolit Master DW475's Avatar
    Join Date
    Jun 2013
    Location
    Idaho
    Posts
    150
    I'm in for the 2 cavity HP with Gas Check, .460 with all the pins.
    dcw038 at msn dot com

  8. #8
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by DW475 View Post
    I'm in for the 2 cavity HP with Gas Check, .460 with all the pins.
    dcw038 at msn dot com
    Thank you Sir, I've got you down

  9. #9
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,973
    shutupandjump at yahoo dot com

    2-cav .462 HP GC with handles
    Colt 1860, it just feels right.

  10. #10
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by Beagle333 View Post
    shutupandjump at yahoo dot com

    2-cav .462 HP GC with handles
    Thanks Sir, got you down

  11. #11
    Boolit Bub
    Join Date
    Dec 2010
    Posts
    37
    1 - 4 Cavity (Brass mold) Solid with Gas Check 0.462 with handles

    mjcrookston at msn dot com

  12. #12
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by ldmcrook View Post
    1 - 4 Cavity (Brass mold) Solid with Gas Check 0.462 with handles

    mjcrookston at msn dot com
    Thanks ldmcrook, I've got you down!

  13. #13
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,541
    I would like a Brass 2 cavity gas check with all the pins please

    wonderwolf at gmail dot com
    My firearms project blog

  14. #14
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by wonderwolf View Post
    I would like a Brass 2 cavity gas check with all the pins please

    wonderwolf at gmail dot com
    Which cast diameter?

  15. #15
    Boolit Master wonderwolf's Avatar
    Join Date
    Apr 2007
    Posts
    1,541
    Quote Originally Posted by Lakehouse2012 View Post
    Which cast diameter?
    Opps, .460 please....heh my dad even specified and I already forgot to put that in.
    My firearms project blog

  16. #16
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Quote Originally Posted by wonderwolf View Post
    Opps, .460 please....heh my dad even specified and I already forgot to put that in.
    Thank you Sir, I've got you down!

  17. #17
    Boolit Master



    Tazman1602's Avatar
    Join Date
    Oct 2009
    Location
    The woods of Northern Michigan
    Posts
    1,422
    4 cavity brass, .462 and all pins plus handles please!

    Philo187 AT yahoo DOT com

    Many Thanks,

    Art
    ________________________________
    "Only accurate Rifles are interesting"
    "Calling criminal invaders Illegal immigrants is like calling dope dealers unlicensed pharmacists"

  18. #18
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Hi Art,

    The HP will only be in 2 cav, the 4 cav forces you into Solid. Which would you prefer?
    Also- Gas Checked or FB?

    Quote Originally Posted by Tazman1602 View Post
    4 cavity brass, .462 and all pins plus handles please!

    Philo187 AT yahoo DOT com

    Many Thanks,

    Art

  19. #19
    Boolit Master



    Tazman1602's Avatar
    Join Date
    Oct 2009
    Location
    The woods of Northern Michigan
    Posts
    1,422
    Quote Originally Posted by Lakehouse2012 View Post
    Hi Art,

    The HP will only be in 2 cav, the 4 cav forces you into Solid. Which would you prefer?
    Also- Gas Checked or FB?
    Thank you! 2cav brass, all pins and handles and I would prefer GC and .462.
    LOVE Miha's molds, I have several and they are FLAWLESS

    Many Thanks,

    rt
    ________________________________
    "Only accurate Rifles are interesting"
    "Calling criminal invaders Illegal immigrants is like calling dope dealers unlicensed pharmacists"

  20. #20
    I'm A Honcho!

    Lakehouse2012's Avatar
    Join Date
    Dec 2016
    Location
    South Lyon & Oscoda, Michigan
    Posts
    351
    Thank you Sir, I've got you down! Northern Mich huh.... East or west side?

    Quote Originally Posted by Tazman1602 View Post
    Thank you! 2cav brass, all pins and handles and I would prefer GC and .462.
    LOVE Miha's molds, I have several and they are FLAWLESS

    Many Thanks,

    rt

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check