I found a brand new harbor freight small one. It was free but has 2 drum's but covers are there any drums that can be used? Or known jars Mayo etc.
If in wrong area sorry please move it. Thanks
I found a brand new harbor freight small one. It was free but has 2 drum's but covers are there any drums that can be used? Or known jars Mayo etc.
If in wrong area sorry please move it. Thanks
I use pvc 4 inch pipe with test caps I used this on one end https://www.homedepot.com/p/Oatey-4-...9103/100113503 I do not suggest it, because mine just broke. On the other end I use https://www.homedepot.com/p/Oatey-4-...403D/100204964. what I will do now is use the mechanical plastic test plug on both ends, but one of the plugs I will remove the wing nut and put a regular nut because I had the wing nut get caught on the motor side once. I also got some non-skid strips and put them around pvc pipe.
In regards to shooting safety.Until you are ready to fire, keep your booger hook off the bang switch.
By the Time You make Or build something you will find it a wast if Time. You can Use a New Lortone Drum. 3 LB There the best . If Your looking to Go Cheap. a 1 QT paint container @ your paint store Or a plastic Folger Coffee container
NRA Endowment Member
International Ammunition Association
New York, the Empire State Where Empires were Won and Lost
I often use plastic screw on top jars with "agitators" glued on the ID. I have a couple 1 lb protein powder jars that I epoxied a small strip of 1/2" molding to act as an agitator, about 6" long to the inside wall (or else the media and brass would just slide down the sides as the jar turns).
My Anchor is holding fast!
1/2" aluminium rod from another project, 1 2x4 and an old plastic paint can. I have plenty of batteries for that drill so I can run it as long as I need to. Works well for free
That is some totally AWSOME Engineering there !
I like thinking outside the box (& wallet too!)
Sent from my iPhone using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |