Thanks all for the info. I have emailed the new company, ST Machining, to see if they have changed any parts of the machine that would cause lower BHN readings.
Thanks all for the info. I have emailed the new company, ST Machining, to see if they have changed any parts of the machine that would cause lower BHN readings.
Its probably pretty simple. Any change in the point angle would result in different readings. Any spring change diameter, length, pressure would result in a different chart. I also have the newer version with the new chart. I found it very easy to use. Simply contact the item your checking with the point of the indenter and rotate 1 full turn and the readout is instant. This is much easier to use than the Lee in my opinion and yes its more expensive but you pay for the convenience of not having to squint and try to line up marks. When used correctly it provides spot on reading and when used incorrectly it will provide inaccurate readings.
Here is their response:
Thank you for the inquiry! Since we began manufacturing the CabinTree Lead Tester the formula has been updated and calibrated based on pure sample alloy mixes after being cured.
Please let us know if you have further questions!
Good Thread I received a Cabine tester for x-mas, gotta love the info you can get from people who actually have used these tools.
Thanks
"Yes or no will almost always suffice as the answer"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |