Reloading EverythingLoad DataMidSouth Shooters SupplyRepackbox
WidenersTitan ReloadingSnyders JerkyInline Fabrication
Lee Precision RotoMetals2
Page 1 of 2 12 LastLast
Results 1 to 20 of 33

Thread: Lee 309-113-F surprise

  1. #1
    Boolit Master
    Join Date
    Mar 2017
    Location
    Center Point, Texas
    Posts
    605

    Lee 309-113-F surprise

    I had a few of these cast up and loaded in LC Match brass with 10g of red dot. Shooting my old sporterized Model 1917 (1-12 twist, 30-06) with an old weaver K-10 scope at 50 yds gave me some pretty decent accuracy.

    Scope was zeroed at 200yds with Federal Match 168 gr ammo, didn't want to mess with scope settings..

    Cast with WW, tumbled with alox, gas checked and sized .309.


    10 shot group at 50 yds.
    Attached Thumbnails Attached Thumbnails IMG_2041x.jpg   IMG_2042x.jpg   Lee c309-113-f.jpg  
    Last edited by arlon; 08-01-2017 at 03:21 PM.

  2. #2
    Banned
    Join Date
    Jul 2016
    Posts
    2,911
    Sweet

  3. #3
    Boolit Master


    Bookworm's Avatar
    Join Date
    Jan 2016
    Location
    Central Oklahoma, on a dirt road.
    Posts
    1,186
    Your new squirrel and rabbit thumper.

    Good shooting !

  4. #4
    Boolit Buddy mwells72774's Avatar
    Join Date
    Aug 2015
    Posts
    201
    Did you use a filler?

  5. #5
    Boolit Master

    Join Date
    Feb 2009
    Location
    N. E. Ohio
    Posts
    1,577
    Very nice. Definitely a squirrel rifle load.

  6. #6
    Moderator Emeritus


    Join Date
    Mar 2005
    Location
    SW Montana
    Posts
    12,481
    I noticed a few decades back that that bullet seemed to be Verals 35-185 fn downsized. It shoots even if it doesn't engrave.
    [The Montana Gianni] Front sight and squeeze

  7. #7
    Boolit Master
    Join Date
    Mar 2017
    Location
    Center Point, Texas
    Posts
    605
    Quote Originally Posted by mwells72774 View Post
    Did you use a filler?
    No filler.

  8. #8
    Boolit Master
    Join Date
    Dec 2009
    Location
    Quilcene, Washington
    Posts
    3,673
    It is also my favorite for my 10" Contender in 32/20.

  9. #9
    Boolit Buddy mwells72774's Avatar
    Join Date
    Aug 2015
    Posts
    201
    Quote Originally Posted by quilbilly View Post
    It is also my favorite for my 10" Contender in 32/20.
    Same load?

  10. #10
    Boolit Master

    Hickory's Avatar
    Join Date
    Feb 2009
    Location
    The Great Black Swamp of Northwest Ohio
    Posts
    4,434
    Quote Originally Posted by quilbilly View Post
    It is also my favorite for my 10" Contender in 32/20.
    Me too.
    Political correctness is a national suicide pact.

    I am a sovereign individual, accountable
    only to God and my own conscience.

  11. #11
    Boolit Master 308Jeff's Avatar
    Join Date
    Dec 2016
    Location
    Tempe, AZ
    Posts
    1,488
    I feel really dumb for asking... What caliber?

  12. #12
    Boolit Master waco's Avatar
    Join Date
    Jan 2009
    Location
    Springfield, Oregon
    Posts
    3,186
    Quote Originally Posted by 308Jeff View Post
    I feel really dumb for asking... What caliber?
    If I had to guess, .30-06
    Maybe .308????
    The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
    Proverbs 1:7

  13. #13
    Boolit Master
    Join Date
    Aug 2015
    Location
    Tacoma,Wa.
    Posts
    566
    Sounds like it has been rebarreled from the twist rate.

  14. #14
    Boolit Master
    Join Date
    Mar 2017
    Location
    Center Point, Texas
    Posts
    605
    Yes, 30-06. New barrel for the old Model of 1917 but with 1-12 twist.
    Attached Thumbnails Attached Thumbnails 209_2144.jpg  

  15. #15
    Boolit Master
    Join Date
    Dec 2009
    Location
    Quilcene, Washington
    Posts
    3,673
    Quote Originally Posted by mwells72774 View Post
    Same load?
    9 gr of 2400 is my favorite but I am switching to either Bullseye or 4198 since 2400 is now made of unobtainium. My Contender 32/20 seems to like an MV of about 1300-1350 with that boolit.

  16. #16
    Boolit Grand Master bedbugbilly's Avatar
    Join Date
    Sep 2013
    Location
    MI (summer) - AZ (winter)
    Posts
    5,100
    Very nice! Don't you just love it when something work out great? Nice shooting!

  17. #17
    Boolit Master waco's Avatar
    Join Date
    Jan 2009
    Location
    Springfield, Oregon
    Posts
    3,186
    Quote Originally Posted by quilbilly View Post
    9 gr of 2400 is my favorite but I am switching to either Bullseye or 4198 since 2400 is now made of unobtainium. My Contender 32/20 seems to like an MV of about 1300-1350 with that boolit.
    2400 is available now at our local Bi-Mart. Do you guys have the Bi-Mart chain up in Quilcene?
    The fear of the Lord is the beginning of knowledge: but fools despise wisdom and instruction.
    Proverbs 1:7

  18. #18
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,446
    I like this because I have recently bought that same mold. By the way that is a wonderful looking 1917.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  19. #19
    Boolit Master 6622729's Avatar
    Join Date
    Jun 2015
    Posts
    583
    Is this clamped in a sled or from your shoulder?

  20. #20
    Boolit Master
    Join Date
    Jan 2010
    Location
    Nampa , Idaho
    Posts
    736
    Very nice shooting.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check