any interested in Miha making a 460-405 with a SWC and Gas Check?

[Lakehouse2012]

I've got a new toy, Marlin 1895 in 45-70, and Miha doesnt have what I'm looking for. I'd like a Elmer keith style nose with 2 or 3 grooves and a GC base. Maybe even in 500 gr also?

Would anyone else be interested in this? I could setup the GB...

Thanks,

Lakehouse2012

[Fastleo]

If if was available with deep hp pins I would be in this

[Beagle333]

I'm voting with Fastleo.

[sukivel]

+2 with Fastleo


Sent from my iPhone using Tapatalk

[Tazman1602]

+3 with fastleo

Art

[brass410]

I'd be interested to for deep pins

[rockrat]

Kind of like the Accurate Molds 46-405K?

[Lakehouse2012]

Ok Guys, good that there is interest. Let me get with Miha and see about approval. I'll get back with you soon.

Thanks!

[Lakehouse2012]

I went ahead and purchased the design tools from TMT, they seem to work really well. Here is my first attempt. I'm looking for your thoughts on it (good and bad).

[Lakehouse2012]

I went ahead and purchased the design tools from TMT, they seem to work really well. Here is my first attempt. I'm looking for your thoughts on it (good and bad).

Hey guys,

I talked to Miha this morning and he is good with turning on the GB. But i dont want to start it till i get a few feedback on size, so give me some feedback please.

Sent from my SM-G920V using Tapatalk

[brass410]

hubba hubba deep pins!!! ya I'm interested, keep going with this bad boy, just slugged my 1895 cb looks like .458 on the micro so 460 should be the number for me.

[Meatpuppet]

I'm in if he can also to a Plain Base Hi-Tek/PC without lube grooves and size 460. +1 on the deep pins.

[Fastleo]

I’d say cut it at .462 so it will work for everyone. I’ll be in

[Fastleo]

Is it 500 gr with the hp?

[Lakehouse2012]

I'm in if he can also to a Plain Base Hi-Tek/PC without lube grooves and size 460. +1 on the deep pins.

I will ask Meatpuppet, but I believe this would mean he cuts 2 cherry's.

I’d say cut it at .462 so it will work for everyone. I’ll be in

Definitely Fastleo, I will list .459-.462 to encompass everyone's diameter.

Is it 500 gr with the hp?

LOL - Yes, I have it right at 500 gr with the HP using WW's..... Would be 514 gr using pure lead with the HP. Remove the pins and you get 546 gr...

Does anyone have an opinion on 500 gr vs 400 gr?

[Fastleo]

I’d much prefer to be near the 400gr weight, that’s where my accuracy is best

[Lakehouse2012]

Good feedback, that is where I was originally leaning. Here is a 400

WW's w/HP it is 400 gr.
Pure lead w/HP is 413 gr.
Solid using pure is 444 gr.
Solid using WW's is 431 gr.

[Fastleo]

Sweet

[ldmcrook]

I am definitely interested. I would prefer the 400 gr.

[Lakehouse2012]

This mold is now available in the Active Group Buys section.

http://castboolits.gunloads.com/show...80#post4284080