Any of you folks have a mould that cast this type of bullet in a 240 t0 250 grain ?
I am looking for a cast bullet similar to the slug that comes with the Cheap shot sobot .
Any of you folks have a mould that cast this type of bullet in a 240 t0 250 grain ?
I am looking for a cast bullet similar to the slug that comes with the Cheap shot sobot .
I've an RCBS mold that I had hollow pointed by Ken Ohlen. Started life as a 270 gr swc with hollow point 250 gr. Have you checked the NOE website for an appropriate mold.
Doc, actually i was looking to buy some bullet from some one on here !
I have a Mihec copy of the RCBS 454-270 SAA PB. It is a Keith style SWC that drops at 280 in solid and about 255 with a large hp. MiHec has several to choose fro along with NOE.
good cheer can you give info on your bullet ,ive been looking for something to feed my 460 rowland
I have a lee 220 gr that I bought from Hollowpoint molds. It is a short ugly bullet and so far not very accurate. But looks mean as all get out.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |