Graf & SonsInline FabricationMidSouth Shooters SupplyRotoMetals2
ADvertise hereTitan ReloadingLee PrecisionStainLess Steel Media

Results 1 to 6 of 6

Thread: .32 rimfire Rolling Block with heeled bullets and reloadable cases

  1. #1
    Boolit Master
    Join Date
    Mar 2011
    Posts
    417

    .32 rimfire Rolling Block with heeled bullets and reloadable cases

    Today I finally got out with my Remington #4 Rolling Block in .32 Rimfire out today now that it warmed up. I am still using the reloadable cases from Dixie Gun Works that use .22 blanks or in my case, I took .22 Shorts, pulled the bullet and powder and used them as the primer. The load uses blackpowder and I have had good results with FFG Triple 7, and this time I used a 85 grain .315" heeled bullet. I took it to the range out to 25 yards and got a pretty decent group. I am cleaning the cases, and will load them back up and I want to be out in the woods after squirrel and grouse either Sunday or Monday.





    No people in the world ever did achieve their freedom by goody-goody talk and moral suasion: it being immutable law that all revolutions that will succeed must being in blood, whatever may answer afterward.

    Mark Twain

  2. #2
    Boolit Master enfield's Avatar
    Join Date
    Feb 2007
    Location
    Nova Scotia
    Posts
    678
    Have the cases stood up to much use. It seems like the thin area where the extractor works would be weak ? I have an olds Stevens that I was thinking about getting the Dixie cases for.

    hey, watch where ya point that thing!

  3. #3
    Boolit Master
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    4,878
    Dixie Gun Works - 32 RF brass - $6.50 per case ... Unavailable
    https://www.dixiegunworks.com/index/...roduct_id/8421

    HL Ebooks - 32 RF brass - $3.67 per case ... Available, In Stock
    http://www.hlebooks.com/32rfkit/prices.htm
    I shoot these cases in my 1887 Tip Up - No Issues using 6mm Flobert primers
    Regards
    John

  4. #4
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    578
    Cool post Dave and thank you! Occasionally I see some of the old Remington rimfire rollers around in decent shape for not a lot of money and I wondered about shooting them. I didn't know the method you're using was available. Might open a window to a new cartridge to play with. Thanks again.
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  5. #5
    I've made .32 rimfire from Fiocchi 9mm. shotshells, which have the following dimensions:

    Case diameter .325in.

    Larger diameter of .343 for the first .35in. or so, corresponding to the brass head on the earlier paper case.

    Rim diameter .398in.

    Rim thickness .058in. (but bevelled on the front edge like conventional shotshells)

    They aren't cheap, at $24.99 from Midway, but might compare well with anything turned from the solid, for the occasional user. For the regular user on game, are you really going to check the .22-primed version is correctly oriented, when the second rabbit hesitates for a moment?

    I made a simple die to size most of the body very slightly, and the larger diameter quite a lot. Some rimfire guns won't accept the rim diameter without modification. I did it with the primer composition dampened at first, but later dry, with a piece of strong plastic tubing pushed over the die. My rod for ejecting the cases was tubular, to bear on the case mouth rather than the inside, with a crosswise handle so that the tube wasn't pointing at my hands.

    I never had any go off, but it is quite important to take no chances, as there is a lot more primer composition than in a cap. The brass is probably much stronger than the early copper ones, and yet when I tried to cook one off on a cooker ring, to send an inert specimen to a friend by mail, it rather effectively shredded itself.

    I've got several pounds of these cases, primed but never loaded or turned over at the mouth, which were sent to auction by the Birmingham Gun Barrel Proof House when they realised that they weren't going to prove that many 9mm. garden guns before death rays took over. But with the legal obstacles to international shipment nowadays, I just have to keep them all to myself, whether I want to or not.

  6. #6
    Boolit Master
    Join Date
    Feb 2016
    Location
    Reno NV
    Posts
    232
    Very cool!!
    I was going to buy one from a friend in .32 long that he had found in his Grandma's attic 50 years ago and had never shot. The last patent date was Sept 9 1873.
    I made a case out of aluminum on my lathe and shot it a few times. It was a gas.
    He decided to give it to his son since its been i the family for so long.
    Oh well, easy come easy go.
    I may have to save my nickels and look for another one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check