These are items I have picked up over the years, and now need to find new homes for them as my reloading area is to cluttered.
Cost of each item is marked plus $ 7.00 mailing cost in a SFRB.
#1, An used in very good condition, 30 caliber Vickerman seating die. $50.00
# 2, An used, in very good condition, Redding 25-20 WCF, Die Set.
This is a 2 die set in the factory box $40.00
# 3, A as new Hornady 300 H&H, Die Set, in the factory box. $45.00
# 4, A used in very good condition, Hornady 30 caliber Seating Die, no box. $ 10,00
# 6, A RCBS 270 Winchester die set in factory box, very good condition, plus a Small Base sizer die ( minus decap rod ), and a Wilson case gauge, used once, well cared for. $ 50.00
# 9, A used Lyman double cavity 380-9mm mould, # 356632, this is a 100 gr truncated flat point bullet, mould is in very good condition. SPF
# 10, A Used H&G Single Cavity Rifle Mold, a used in good condition, single cavity, 30 caliber mould. The factory mould number appears to be 85. There is no sprue plate or pivot screw. SPF
Small Flat Rate Box is the best route to go for shipping on these items, $ 7.00.
First PM, or I will take gets item, I track the time on the posts, or PM's to keep track of sales.
Payment to be by Money Order, or Cashier's Check, payable to
James Wisner
P.O. Box 186
Adna, WA 98522-0186
USA sales only.
Sold
# 5, A used, in very good condition, RCBS 20ga Shot Shell Die Set. All parts are present, including the manual in the factory box. This die set requires a press that has the removeable bushing in the top of the press tuse this 1 1/4" x 12tpi die set Sold
# 7, A RCBS Powder Checker for progressive press, New in box, SOLD
# 8, Lyman 41 caliber gas checks 3 boxes. 1 box is unopened and weighs 7.8 ounces. The other 2 boxes have been opened, partly used, and they both weigh 5.5 ounces each. These are OLD, they were in a Gun Shop when it closed in 1994 all three boxes SOLD