From what you said you are correct. If you felt drag at 0.070, i would say its 0.070 or 0.007 over. Not ideal but usable.
Be well
From what you said you are correct. If you felt drag at 0.070, i would say its 0.070 or 0.007 over. Not ideal but usable.
Be well
When you read the fine print you get an education
when you ignore the fine print you get experience
You can correct headspace on a 1873 Winchester by soldering a shim on the bolt face as well.
Sent from my SAMSUNG-SM-G930A using Tapatalk
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |