Inline FabricationMidSouth Shooters SupplyGraf & SonsLee Precision
StainLess Steel MediaADvertise hereRotoMetals2Titan Reloading

Results 1 to 5 of 5

Thread: 327 federal heavy bullets

  1. #1

    327 federal heavy bullets

    I started a thread like this before, and got a lot of good replies. I've been shooting a 120 grain SWC plain base in my Ruger LCR with both 700x and Bluedot, and it's very accurate. I've been waiting about a month now for a Henry 327 federal I ordered from the local gun shop, and it's given me way too much time to think. It seems that the lever gun does not allow a cartridge OAL nearly as long as my LCR will. I've heard multiple reports now that the Henry will only handle an OAL that is slightly longer than the book max. My SWC's are quite a bit longer. I've been eyeballing the Accurate mold 31-135S for a while now, and would like that but with a gas check. It's a shame the 32 cal bullets are so light. The 327 seems to be at home around 115 grains, 100 grains is light for caliber IMO, but those 1500+ FPS velocities from a revolver look nice on paper. I think 135 grains with some slow powder in a rifle could be a mean combo. Has anyone else done something similar? I'm looking to push these to the max, although I never sacrifice accuracy for speed. I've always got H110, although I never seem to like it that much. Besides 2400, I've been checking out two powders that I think could work well. IMR 4227 and Alliant Power Pro 300-MP. I'm looking for load data if anyone has any for a bullet this heavy. Any input on powders is appreciated.

  2. #2
    Boolit Master
    Join Date
    May 2009
    Location
    North Central Montana; across the wide Missouri
    Posts
    1,813
    All my 327 revolvers prefer my hand cast 311316 GC. Comes in at 115-116 from my self formulated alloy. I load it with A#9 or 2400. Seems to do what I want. I have 100 gr. Rainier plated, they work but seem to shoot a little wider group than the heavier. Latest issue of Handloader has a great article on 327 and the wide, wide velocity variation in the 327. I've noticed differences of felt recoil and sound but I don't own nor need a chrono. I haven't read and reread the article yet, but it looks interesting.

  3. #3
    Boolit Bub
    Join Date
    Apr 2011
    Posts
    43
    I’ve been using the Accurate 31-125FG with red dot (since I have so much) in both my SP101 4” and my LCR. It is a gas check. I’ve wondered as well if the Henry would handle it. Very easy shooting with 3 gr of the red dot but I’m just a plinker. I believe I’m getting fairly close to 125 gr as cast with wheel weights + tin and love the cartridge and wide meplat. I’m traveling now and don’t recall COAL, but had some suspicions of the Henry not being able to handle it

  4. #4
    Boolit Master Outpost75's Avatar
    Join Date
    May 2013
    Location
    over the hill, out in the woods and far away
    Posts
    5,224
    This data for .32 S&W Long gives you a safe place to start with Alliant #2400 in the .327 with heavier bullets:

    .32 S&W Long Factory Loads Vs. Alliant #2400 In Revolvers and Rifle
    Remington cases, Federal 200 primers in all handloads:

    Ammo Type________________Colt 2”__________Colt 4”___________H&R18”

    PMC 98 LRN factory_________687, 13 Sd_______797, 17Sd________945, 16 Sd

    Accurate 31-114D, 6.3 #2400__768, 22Sd_______839, 37 Sd________1205, 22 Sd

    Accurate 31-125D, 6.3 #2400__820, 19Sd_______890 19 Sd_________1240, 29 Sd

    Accurate 31-134D, 6.3 #2400__828, 19 Sd_______913, 16 Sd________1221, 16 Sd
    Ejected cases fall out easily, clean burn, accurate, recoil similar to .38 Special +P.

    Click image for larger version. 

Name:	31-114D-D.jpg 
Views:	5 
Size:	22.2 KB 
ID:	211636Click image for larger version. 

Name:	31-125D-D.jpg 
Views:	6 
Size:	22.7 KB 
ID:	211637Click image for larger version. 

Name:	31-134D-D.jpg 
Views:	6 
Size:	22.6 KB 
ID:	211638
    The ENEMY is listening.
    HE wants to know what YOU know.
    Keep it to yourself.

  5. #5
    Thanks a lot for that info. If 32 S&W long can get over 1200 fps with a very similar bullet I want to, the 327 federal should really get them moving. Are these loads you worked up yourself? I've got plenty of manuals with all the older 32's, and none seem to go over 115 grain. I found a thread of a person who got a 150 gain cast bullet to 1125 fps with 2400 in a handgun with good accuracy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check