MidSouth Shooters SupplyLee PrecisionWidenersInline Fabrication
StainLess Steel MediaTitan ReloadingGraf & SonsRotoMetals2

Results 1 to 7 of 7

Thread: 315 HBWC in a .32 ML?

  1. #1
    Boolit Man Trapaddict's Avatar
    Join Date
    Jan 2011
    Location
    Howell, MI
    Posts
    115

    315 HBWC in a .32 ML?

    I was looking at some bullet designs offered by NOE and came across a HBWC intended for the 32 S&W long and started thinking that it might just work in a 32 caliber TC Cherokee as a light plinking and small game load. Looks like a perfect little 32 Minie ball. The TC has a 1:30 twist barrel. Anybody out there ever played with anything like this before?

    Jeff
    A woman has the last word in any argument.
    Anything a man says after that is the beginning of a new argument.

  2. #2
    Boolit Master

    Join Date
    Feb 2006
    Location
    Southern Illinois
    Posts
    5,825
    I haven't but also thought of it. My 32s have a 1/48 twist thought so yours actually has a better chance of working with the 1/30 twist.
    Aim small, miss small!

  3. #3
    Boolit Master
    Join Date
    Dec 2016
    Posts
    171
    Keep us updated if you try this out

  4. #4
    Boolit Master Nobade's Avatar
    Join Date
    May 2005
    Location
    Albuquerque, Nuevo Mexico
    Posts
    4,481
    Tried that, didn't work. They are way undersized as is, and even though I got a good fit by paper patching, they never shot very well. Hornady swaged bullets, and a TC and a Dixie rifle.
    "Quemadmoeum gladis nemeinum occidit, occidentis telum est."

  5. #5
    Boolit Master Good Cheer's Avatar
    Join Date
    Jul 2010
    Location
    the Ark
    Posts
    2,891
    I've tried various combinations trying to get Green Mountain .40 barrels to shoot other than round ball, with varying degrees of success. Lubed lead, paper patched, more powder, less powder...
    Getting consistent enough results just never happened: Good, looking good, flyer, good, looking good, flyer.
    Finally decided that the biggest problem was that short boolits lack inertia, therefore being difficult to spread out to fill the rifling. 2nd problem seems to be that the rifling wasn't scaled down with the reduction in bore diameter.

    All that said, why wouldn't a small bore minie barrel work with a properly designed boolit?
    I'd like to have a barrel to shoot the hollow base Lyman #386178 and .380 round ball. Perhaps it would shoot the NEI #194 (.388-198-PB) SWC like a maxi.

  6. #6
    Boolit Master
    Join Date
    May 2014
    Posts
    630
    I used to swag these and .358 HBWC to sell to the cartridge conversion customers. An infrequent customer from Kansas would buy 1-200 of each to use in his M.L.s. Reported good results. Swagged from pure Pb. The wet conditions for 8 days after the fire ruined my C-H 4D dies.

  7. #7
    Boolit Master Squeeze's Avatar
    Join Date
    Feb 2013
    Location
    NJ coast
    Posts
    374
    Not so much in a .32 cal. but I have been playing around with fast twist .36. I have a 14 twist .360/.368 (custom Oregon barrel) that does very well with a GG accurate 36-270L. Im now in the process of building a Smokeless spec ML from a 9.3mm (Krieger) barrel. ( .358/.366, 1-14 twist) I plan to try .35 whelen bullets or even full formed 9.3. I am just a small caliber nut, and like to tinker.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check