Inline FabricationLoad DataLee PrecisionMidSouth Shooters Supply
RepackboxReloading EverythingWidenersRotoMetals2
PBcastco Titan Reloading
Page 1 of 4 1234 LastLast
Results 1 to 20 of 75

Thread: CLOSED - Oreo/Miha 10mm WFN 220gr, 200gr, 190gr (rerun)

  1. #1
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625

    CLOSED - Oreo/Miha 10mm WFN 220gr, 200gr, 190gr (rerun)

    This mold will be offered cut to .691" depth for a 220gr WFN, .631" depth for a 200gr WFN, or .601" depth for a 190gr WFN.
    NO MIX AND MATCH IN THE SAME MOLD BLOCK!

    All molds come with all three pin sets. There are two hollow point pin sets and blank pins for casting solids. Both the round and penta-pins will remove 5gr from the solid boolit. So if you buy a mold cut for a 190gr WFN and use the hp pins you'll get 185gr HP boolits.


    ----------------------------------------
    Options: (€135 - 15% discount = €114.75)
    1. 4-cavity brass mold cut for 220gr WFN
    2. 4-cavity brass mold cut for 200gr WFN
    3. 4-cavity brass mold cut for 190gr WFN
    P. Cavities cut without lube grooves for a dedicated powder coat mold.
    ----------------------------------------

    To place an order post your disguised PayPal email address, and the options / quantity you want. I will record your order on the participation list below. Please then check that I have recorded your order correctly. Miha will contact you at the email address listed next to your name on the list when he is ready for payment / delivery.

    Please post your orders like this:
    Oreo, 3P, jdecar1 at hotmail dot com

    ----------------------------------------
    GEL TEST DONE BY The Chopping Block
    LINK TO THE RESULTS THREAD






    Last edited by Oreo; 02-04-2018 at 01:58 PM.

  2. #2
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Tally:
    1. 3
    2. 11
    3. 5

    1p. 3
    2p. 3
    3p. 3

    Participation List:

    001. Oreo, 2, jdecar1 at hotmail dot com
    002. Oreo, 3P, jdecar1 at hotmail dot com
    003. osteodoc08, 2, tomgarcia15 at yahoo dot com
    004. Greg S, 1, Gpspero64 at gmail dot com
    005. Rockwell, 1P, rockwell5926 at gmail dot com
    006. glock_556, 2, glock_556 at yahoo dot com
    007. FLYCUTTER , 2, r_kark at att dot net
    008. bsev81, 1P, brett08 at gmail dot com
    009. MyAlias789, 2, MyAlias789 at gmail dot com
    010. EMR, 2P, kraaazymike at gmail dot com
    011. gtgeorge, 2, gspatton at gttransmissions dot com
    012. dsltech, 3, dsltech at comcast dot net
    013. castblast , 2, sthwld64 at gmail dot com
    014. BK7saum, 1P, bradleyk4860 at gmail dot com
    015. StuBach, 2, tryandstopthisox at gmail dot com
    016. RJM52, 2, vitalsupplynh at gmail dot com
    017. PSGCLTS, 3P, bwongpd at aol dot com
    018. DW475, 3, dcw038 at msn dot com
    019. DW475, 3, dcw038 at msn dot com
    020. saturn, 3, saharahg at yahoo dot com
    021. RedHawk357Mag, 3, RedHawk357Mag at gmail dot com
    022. Rodbuster55, 3p, emmypaul9 at live dot com
    023. bushog, 1, boo-haaa at hot mail dot com
    024. bushog, 2, boo-haaa at hot mail dot com
    025. 45workhorse, 2, shasselback at hamptoncountysc dot org
    026. Jason_2111, 2p, jason_postman at yahoo dot com
    027. ryan, 1, dearborn416 at yahoo dot com
    028. MajorDude, 2P, JHGD at bex dot net
    029.
    030.
    Last edited by Oreo; 03-13-2018 at 03:35 AM.

  3. #3
    Boolit Grand Master

    Join Date
    Jun 2013
    Location
    NW GA
    Posts
    7,243
    I'll take #2 option

    tom garcia 1 5 at y a h o o dot c o m

    No spaces at all in address

  4. #4
    Boolit Master


    Join Date
    May 2015
    Location
    Anchorage, AK
    Posts
    1,112
    I'll go for option #1. Gpspero 64 at G mail dot com.

  5. #5
    Boolit Buddy
    Join Date
    Feb 2016
    Location
    New Jersey
    Posts
    446
    Has anyone ran these in a 10mm 1911, I'm curious of the wfn created any feeding issues.

  6. #6
    Boolit Mold



    Join Date
    Jun 2013
    Location
    Wyoming
    Posts
    27
    Rockwell, 1P, rockwell 5926 at gmail dot com

  7. #7
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Quote Originally Posted by Strtspdlx View Post
    Has anyone ran these in a 10mm 1911, I'm curious of the wfn created any feeding issues.
    I've heard they feed ok in 1911s if you seat them ≈.010" shorter. YMMV. Check the results thread.
    Last edited by Oreo; 01-06-2018 at 09:24 PM.

  8. #8
    Boolit Mold
    Join Date
    Jun 2007
    Posts
    23
    glock_556, 2, glock_556 AT yahoo DOT com

  9. #9
    Boolit Buddy
    FLYCUTTER's Avatar
    Join Date
    Mar 2010
    Posts
    449
    FLYCUTTER , option 2,
    R underscore KARK at ATT dot NET

  10. #10
    Boolit Bub bsev81's Avatar
    Join Date
    Aug 2016
    Location
    South Carolina
    Posts
    32
    bsev81, 1P, brett08 at gmail dot com

  11. #11
    Boolit Man
    Join Date
    Oct 2010
    Location
    Reno Nevada
    Posts
    98
    Weight of 3p

    Bill

  12. #12
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Quote Originally Posted by WMB30 View Post
    Weight of 3p

    Bill
    They were right on the money last production run. My 190gr pc mold drops exactly-190gr solids. Its my favorite mold.

    Sometimes the 200gr and 220gr molds drop up to 5gr heavy depending on alloy, temp, etc.

    ETA: I just added a link in the first post to a gel test of this boolit done by The Chopping Block.
    Last edited by Oreo; 01-07-2018 at 09:14 AM.

  13. #13
    Boolit Mold
    Join Date
    Jan 2018
    Posts
    2
    Give me a #2.

    MyAlias789 at gmail dot com.

  14. #14
    Boolit Mold
    Join Date
    Jan 2018
    Posts
    2
    With the size of the meplat did anyone have issues with 10mm OALs being 1.260 to 1.250?

    I’ve tried one other wide meplat boolit and the rounds bound up in glock mags.


    Sent from my iPhone using Tapatalk

  15. #15
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Quote Originally Posted by MyAlias789 View Post
    With the size of the meplat did anyone have issues with 10mm OALs being 1.260 to 1.250?

    I’ve tried one other wide meplat boolit and the rounds bound up in glock mags.
    As best I recall, 1.260 was really borderline in glock mags but 1.250 was reliable. I chose the .300" meplate because it was the widest a glock mag could handle at SAAMI cartridge length. 1.260" works up to about ten rounds in the mag and then you can't load any more because of the binding issue. (Surprisingly, a glock will feed a meplate almost up to a full wadcutter. The magazine is limiting.)

    Keep in mind, there's more case capacity under this boolit at 1.250" then any other design at 1.260". You're not losing anything.
    Last edited by Oreo; 01-07-2018 at 04:23 PM.

  16. #16
    Boolit Master
    Elkins45's Avatar
    Join Date
    Mar 2010
    Location
    Northern KY
    Posts
    2,414
    Your pictures aren’t showing.

    Cost?
    NRA Endowment Member

    Armed people don't march into gas chambers.

  17. #17
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Hmmph. Anyone know of a good free image hosting site? Looks like photobucket has gone as far as it will for me.

    Looks like Miha's brass four cavity hollow point molds are running €135, but don't take that as final till I get confirmation from Miha.
    Last edited by Oreo; 01-07-2018 at 09:23 PM.

  18. #18
    Boolit Bub bsev81's Avatar
    Join Date
    Aug 2016
    Location
    South Carolina
    Posts
    32
    If using chrome, there is an add-on to fix it. If you search for Photobucket hotlink fix and install it, should fix the issue. Works for desktop/laptop PC, mobile still shows the stupid message.

  19. #19
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    I moved the images and updated the op. Can you guys see them ok now?

  20. #20
    Boolit Buddy
    EMR's Avatar
    Join Date
    Oct 2017
    Location
    CA
    Posts
    252
    EMR, 2P, kraaazymike at gmail dot com

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check