I have a 11 year old LNL with a case feeder, 10 shell plates, three bullet feed dies, roller handle, three different case feeder hopper plates, counter, low primer and powder warning system for sale. I would like $700 for the whole shebang. Do the math and you can see it's a smok'n deal. The trick is you have to be able to pick it up. Shipping would require a lot of boxes and a second mortgage on your home. I'm just not using this as I used to. So, it moves on to a new home. I'm in Santa Clarita CA. I'll drive some to deliver it if needed. Each shell plate is about $20 new. Each bullet feeder die is about $35 new. The roller handle is $40, the counter/control center is $200, the low primer sensor was $50 and the low powder sensor the same. The shell plates cover 3006, 223, 32-20 45-70 30-30, 375 win, 38 sp, 40 sw, 45 auto 357 mag, and more. All are the new model for the case kicker. There are duplicates of some.
So lets add it up. LNL press $450 control center $200, ten shell plates $200, roller hbandle $40, low powder and primer sensors $100, case feeder $325, bullet feeder dies $90, case feeder disks $70 total about $1500. Your price $700
|
   
   
|
|
Originally Posted by omgb
