StainLess Steel MediaInline FabricationLee PrecisionRotoMetals2
Titan ReloadingGraf & SonsMidSouth Shooters SupplyADvertise here

Results 1 to 3 of 3

Thread: VS - BTSniper 45 cal SWC BOOLIT Swage Die!

  1. #1
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,162

    VS - BTSniper 45 cal SWC BOOLIT Swage Die!

    Here is a great die I put together for a customer that had to back out of the deal. A 45 cal SWC that will be perfect for making your 45 cal boolits even more accurate and perfectly symmetric as well as eliminating any voids in the cast lead, this should give the best possible oportunity for utmost accuracy potential from cast boolits. Use with a Corbin base guard, or naked lead boolit for TL, an already lubed boolit, a PC coated boolit or even make half jacketed bullets.

    Bullets from die measure .4528" at the start of the barring surface and .4535" at the base of a typical 240 grain bullet. Diameter of meplat is .312, should be just about perfect for any 45 cal cast boolit needs.

    Comes with FP punch, additional HP punch available for $75 extra.

    Die is same material and quality as my BTSniper premium bullet swage dies, quality professionally heat treat steel with awesome Black Nitrdie finish.

    I sell similar dies exactly like this for $495.

    I'm letting this excellent die go for $395 plus $20 S&H

    Can be used in any decent reloading press and a simple mallet is all that is needed to eject the bullet from the die (auto ejection system is also available). I don't know the max BNH it will handle but I use these dies with brass jackets so it should handle most typical hardness well, off the top of my head I would put it at 15BNH max and preferably 10 BNH or less for max life. Should last for several 10s or 100s of thousands of rounds.








    240 grain 44 cal swaged up to 45 cal SWC. Use Corbin 45 cal base guards for perfect results!




    or even 45 cal jackets can be used (may require a core seat die for best results). Lead boolit was a 45 cal 245 grain swaged to SWC.


    I am happy to accept paypal (friends and family), money order, check or credit card over the phone.

    Thanks for looking.

    Brian Thurner
    PO BOX 1783
    Hood River, Or.
    979031

    PayPal address is BT_Sniper@Hotmail.com

    BTSNIPER llc.
    541-436-4095
    When you stop learning you are dying.

    Check out available BTSniper products and prices at
    http://castboolits.gunloads.com/foru...?114-BT-Sniper

    Say hello and like my FB page as well.
    https://www.facebook.com/bt.sniper/

    Good shooting and swage on!

    Brian

  2. #2
    Boolit Man
    Join Date
    May 2016
    Location
    Near the Keg
    Posts
    93
    PM Inbound
    Alcohol Inventory Reduction Specialist (Journeyman Level)

  3. #3
    Vendor Sponsor


    BT Sniper's Avatar
    Join Date
    Jan 2009
    Location
    Oregon next to the river
    Posts
    5,162
    It's yours!

    SPF!
    When you stop learning you are dying.

    Check out available BTSniper products and prices at
    http://castboolits.gunloads.com/foru...?114-BT-Sniper

    Say hello and like my FB page as well.
    https://www.facebook.com/bt.sniper/

    Good shooting and swage on!

    Brian

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check