Inline FabricationTitan ReloadingRotoMetals2MidSouth Shooters Supply
Lee PrecisionGraf & SonsStainLess Steel MediaADvertise here

Results 1 to 8 of 8

Thread: Woolite sub

  1. #1
    Boolit Master
    Join Date
    May 2010
    Location
    central texas
    Posts
    541

    Woolite sub

    Anyone have a cheaper alternative to woolite for their tumbler to get lanolin off their brass using ss pins?

  2. #2
    Boolit Master
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    4,981
    mineral spirits solvent
    Regards
    John

  3. #3
    Boolit Master
    Join Date
    Dec 2016
    Posts
    552
    Dawn dish soap and a hot water rinse.

  4. #4
    Boolit Master


    Walter Laich's Avatar
    Join Date
    Aug 2005
    Location
    Cypress, Republic of Texas
    Posts
    3,046
    I go a different way

    squirt some 70% alcohol on an old towel

    dump the brass or completed cartridges on the towel, fold it into thirds, longway and see-saw the towel back and forth. do this about 10 times to remove the lanolin
    NRA Life
    USPSA L1314
    SASS Life 48747
    RVN War Games, 2nd Place

  5. #5
    Boolit Master dbosman's Avatar
    Join Date
    Feb 2013
    Location
    East Lansing, MI, USA
    Posts
    1,650
    I use the same tumbler (wet or dry) and run crushed nut shell media, to remove the lanolin. I do add a nice splash of mineral spirits to the media. Couple of hours and the lanolin is gone. Another hour or so with fresh media and NuFinish to preserve the surface.

  6. #6
    Boolit Buddy SODAPOPMG's Avatar
    Join Date
    Mar 2013
    Location
    Florida panhandle
    Posts
    65
    dawn ,lemi shine, pins, water tumble for 2 hours brass will be clean and lanolin free
    if you tumble too long the lanolin will homogenize with the water and coat everything with
    a green slime. if this happens refill with the same ingredients and add 1 cup of flour and tumble for 1 hour
    Great minds discuss ideas
    Average minds discuss events
    Small minds discuss people

  7. #7
    Boolit Master

    Moonie's Avatar
    Join Date
    Apr 2010
    Location
    Thomasville North Carolina
    Posts
    4,411
    I clean my rifle brass with ss pins, dawn and lemishine, then lube with lanolin, then into another tumbler barrel with car wash and wax to remove the lanolin, no ss pins for the second tumble. Works for me.

  8. #8
    Boolit Bub
    Join Date
    Aug 2007
    Location
    Broken Arrow, OK
    Posts
    36
    5lbs SS pins in 15lb tumbler with up to 8lb of brass.
    2 tbl spoons of Dawn
    2 tbl spoons of Lemishine
    1 gal water
    2hrs of tumble does the job

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check