I got the top on tonight so phase 1 of my bench rebuild is complete. I need to build a support for the end since I opted to go a full 8 foot on the top. I'm thinking of a cabinet to hold my 3 MEC presses. A while back someone nearby redid their kitchen and I managed to get 3 free cabinet bases that were in good condition. Next is removing some shelves above the bench and building a upper cabinet to match the 8 foot counter top. I'm planning on under cabinet lights and plugs since there is not enough plugs nearby. On the Wall beside it I have a small flat panel TV that will go there to be a monitor for a Raspberry PI so I can look up loads and such from the bench.
Now to unload the boxes stored around it.