MidSouth Shooters SupplyWidenersRepackboxLoad Data
Inline FabricationRotoMetals2Lee PrecisionReloading Everything
Titan Reloading
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: what steel for firingpins?

  1. #1
    Boolit Buddy Swede 45's Avatar
    Join Date
    Jun 2014
    Location
    Sweden
    Posts
    192

    what steel for firingpins?

    I plan to make extended firingpins for my Ruger Gp100 and my S&W 686 as I get light strikes during DA .. SA no problems..Yeah.. I got the triggerpull set low as these are competition guns..
    My friend with a lathe that will help me make them, asked me what steel ? I have no clue on different steel ?
    Suggestions?
    Thanks.

  2. #2
    Boolit Master
    labradigger1's Avatar
    Join Date
    Apr 2013
    Location
    west virginia
    Posts
    1,284
    I use grade 8 bolts, turn to size, tested for function then case hardened with kasenit.
    Life is so much better with dogs!

  3. #3
    Boolit Master



    skeettx's Avatar
    Join Date
    Jul 2009
    Location
    Amarillo, Texas
    Posts
    4,102
    NRA Benefactor 2004 USAF RET 1971-95

  4. #4
    Boolit Master Skipper's Avatar
    Join Date
    Apr 2008
    Location
    Behind the lines in Commiefornia
    Posts
    764

  5. #5
    Boolit Buddy Swede 45's Avatar
    Join Date
    Jun 2014
    Location
    Sweden
    Posts
    192
    Thanks.. will forward the info to my friend.

    Skeetex: thank you, but Midway doesn´t ship to Sweden.. brownells got a rep in Europe.. but the price is x2 and the shipping of the pin is 30$ true postage is about 1 $
    And its fun to make things..

  6. #6
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,335
    A little heavier DA trigger pull is better than pierced primers IMO.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  7. #7
    Boolit Master
    Join Date
    Aug 2007
    Posts
    791
    Years ago, I read an article written by a gunsmith who extolled the virtues of using old stainless 120" whip antennas which were once the rage for mobile CB radio. He wrote that it's not that hard, but very tough and would take a beating without breakage and were his choice for use in Win '94's the state police used to have in their cruisers - which is also who he got the antennas from. Another possibility is S7, which is a forming die steel used to make parts which will be subjected to heavy blows without fracturing. CPM10-V is also used for this, but is expensive. Isn't there a place called Metals Warehouse or something for those needing small rather than industrial quantities of metal for small projects?
    Last edited by yeahbub; 01-04-2018 at 11:06 PM.

  8. #8
    Boolit Master

    Join Date
    Feb 2007
    Location
    Lewiston, Idaho
    Posts
    2,732
    If it works fine when single action then the firing pin is fine the way it is. You need to correct the hammer spring for double action.

  9. #9
    Boolit Grand Master uscra112's Avatar
    Join Date
    Jun 2006
    Location
    Switzerland of Ohio
    Posts
    6,314
    Will McMaster-Carr ship outside the USA? (www.mcmaster.com)
    Cognitive Dissident

  10. #10
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    2,126
    I have made many from Unbrako socket screws......the german made screws,not the current subcontinent rubbish.The old Unbrako screws were Gr 11.9 or better,and machine easily ,and are tough enough to not mark under hammer impact.....Beware of current HT screws which are mostly Chinese or Indian,and are very hard med. carbon steel.......beware Unbrako and many famous brands are now oriental rubbish.

  11. #11
    Boolit Buddy
    Join Date
    Jul 2009
    Posts
    344
    I have used allen wrenches to machine such parts, very tough tool steel! The toolman.

  12. #12
    Boolit Grand Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    6,073
    #2 on the whip antenna I got a bunch when we switched over to high band and have used them now for a while and they work great, have yet to have one break.

  13. #13
    Boolit Buddy
    Join Date
    May 2013
    Location
    OH
    Posts
    272
    I have used hex wrenches and drill bits to good effect

  14. #14
    Boolit Buddy 55fairlane's Avatar
    Join Date
    Oct 2017
    Location
    Ft Wayne Indiana
    Posts
    125
    My choices, are either drill rod (silver steel in th EU) or 4140 prehard, but any good tool steel should be ok....

  15. #15
    Boolit Buddy Reverend Recoil's Avatar
    Join Date
    Feb 2008
    Location
    Louisiana
    Posts
    379
    Engine cylinder head bolt are tough stock material for firing pins.
    DRB #2276 President's Hundred 2021

  16. #16
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,335
    Quote Originally Posted by John Taylor View Post
    If it works fine when single action then the firing pin is fine the way it is. You need to correct the hammer spring for double action.
    Thank you.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  17. #17
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,833
    ..............I use S7 tool steel.

    ...........Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  18. #18
    Boolit Grand Master

    Join Date
    Mar 2005
    Location
    Bloomfield, Nebraska
    Posts
    6,073
    Just a nte as I do Muzzleloaders and antique restoration...I have seen a lot of pins made from old nails and some from old square nails that are in shotgun 150 years old and they still work after a fashion. They are still unbroken anyway not what I would choose but they worked for a long time. I think the reason a lot of the old ones broke was too hard the case went all the way through the pin.

  19. #19
    Boolit Grand Master
    Join Date
    Feb 2006
    Location
    Kaneohe, HI
    Posts
    5,562
    I use old drill bits.
    Cheap and easy to work with

  20. #20
    Moderator

    W.R.Buchanan's Avatar
    Join Date
    Mar 2011
    Location
    Ojai CA
    Posts
    9,872
    S7 is the right answer and Buckshot and Skipper got it right.

    Randy
    Last edited by W.R.Buchanan; 01-01-2018 at 07:58 PM.
    "It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
    www.buchananprecisionmachine.com

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check