In need of a small priming pin for the old Lee Auto Prime tool. Called Lee there are no parts available. Anyone have one they don't use?
In need of a small priming pin for the old Lee Auto Prime tool. Called Lee there are no parts available. Anyone have one they don't use?
Good luck.
Last edited by jimkim; 12-19-2017 at 07:34 PM.
US Govt mantra: If it's moving tax it. If it's still moving regulate it. If it stops moving subsidize it
Maybe give one of the sponsors here a try:
https://www.titanreloading.com/priming-system-parts
This might be the part??
https://www.titanreloading.com/primi...all-primer-pin
G'Luck!
2nd Amend./U.S. Const. - "A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed."
~~ WWG1WGA ~~
Restore the Republic!!!
For the Fudds > "Those who appease a tiger, do so in the hope that the tiger will eat them last." -Winston Churchill.
President Reagan tells it like it is: https://www.youtube.com/watch?v=c6MwPgPK7WQ
Phil Robertson explains the Wall: https://youtu.be/f9d1Wof7S4o
Watch evil - bay and snatch them up when ever they are at a reasonable price. Refuse to pay thirty to fourth dollars for a used one. Not sure why they have to improve something that works well to start with. But it almost never fails they must screw up a good thing by improving it.
Are you looking for the pin to the one with the tray for primers or the old one with screw in shell holders?
My old round tray lee primer pins were a simple t shaped pin I believe head size was the same and the pusher part was sized to the primer. One wouldn't be hard to turn up for it. If you have the tray you can get the head size and then the rods size from it. If theres a machine supply store that specializes in machinists supplies a ejector or core pin may be found that only needs to be cut to length even. core pins are 60 rc thru and ejector pins are case hardened so you want to get it in the right size. If you go this route.
Another way may be a allen head machine screw if the head and shank can be found in the correct dia.
PM sent- I have some extras
Loren
BigIron, I also have a few extras that I had bought from Lee, from the older, round primer holders, I must have 5 or 6 of these priming tools, so there has got to be a spare SP pin in my box of parts.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |