Titan ReloadingGraf & SonsLee PrecisionInline Fabrication
ADvertise hereStainLess Steel MediaRotoMetals2MidSouth Shooters Supply

Results 1 to 8 of 8

Thread: Was pushed to build another pistol

  1. #1
    Boolit Buddy .30carbnut's Avatar
    Join Date
    Sep 2014
    Location
    Arkansas
    Posts
    50

    Was pushed to build another pistol

    Hello all, To make a long story semi short, a little more than a year ago my father brought me a 5 foot long piece of 304 hexagonal stock and told me to build him a gun with it, I said ok and told him it would have to be a pistol. Well I had been putting it off because of the hex shape, but a month ago they diagnosed my father with Multiple Mioma, so I figured I should get my butt in gear and get the pistol made for him for Christmas. I started working on it 11/14/2017 and finished it today 12/16/2017. to save time I bought the stock pre-shaped and inlet-ed it for the hex barrel and the lock that I designed and built from several other lock designs. Hats off and many thanks to John Lifer j.lifer@ozarklaserengraving.comfor the engraving,he did a wonderful job and got it done quickly so I could get the pistol done in time for Christmas. You think he will like it?
    Here is the link to the whole build. https://postimg.org/gallery/21cxjqxmo/
    [IMG][/IMG][IMG][/IMG][IMG][/IMG]

  2. #2
    Boolit Master

    merlin101's Avatar
    Join Date
    Mar 2010
    Location
    Rochester NY heading to Gaults Gulch
    Posts
    1,110
    "You think he will like it?" Oh yeah!
    It's not the years in your life that count. It's the life in your years (Abe Lincoln)

    "A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government. George Washington

  3. #3
    Boolit Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    4,639
    He will love it. Our prayers are sent for your dad. Cancerland is a crappy place to be.

    Sent from my SAMSUNG-SM-G930A using Tapatalk

  4. #4
    Boolit Master
    Plate plinker's Avatar
    Join Date
    May 2012
    Location
    Indiana
    Posts
    1,714
    Very cool. Thats a wonderful gift.

  5. #5
    Boolit Master


    Join Date
    Aug 2009
    Location
    southern MO
    Posts
    2,590
    You did really, I mean really good. Your dad will love it. My prayers for you and your dad. It is a rough time, but a good attitude about it will take some of the roughness out. Thank you for sharing this special gift with us.
    Socialism is a philosophy of failure,
    the creed of ignorance, and the gospel of envy,
    its inherent virtue is the equal sharing of misery."
    -- Winston Churchill

  6. #6
    Boolit Master
    Join Date
    Jan 2017
    Posts
    159
    Not too bad. Hope things get better for your dad and family in the new year. I'm sure he'll love that. Makes me want to do another one.

  7. #7
    Boolit Master map55b's Avatar
    Join Date
    Oct 2013
    Location
    Santa Clara, CA
    Posts
    255
    Nice work! Best wishes for your Dad.

  8. #8
    Boolit Master
    Join Date
    Dec 2009
    Posts
    4,490
    Very nice.
    I've seen a few Hex barreled rifles in the past. One that hung on the wall of a back woods grocery store had a very thick Hex barrel made of brass. It looked near as big as the old 4 gauge elephant guns.
    A gunmaker I read about many years ago used six sided rock drill shafts as the basis for his barrels.
    IIRC many of the early matchlocks used Hex barrels.
    I figure barrel making of those days was a development of the hollow iron shafts found on some of the higher grade war hammers and morning stars. Some I've seen showed signs of being hammer forged around a mandrel.
    I suspect that a Hex cross section is stiffer under load than an octagonal section. In the same way a tripod is self correcting and more stable than a four limbed framework.

    Always good to do something for dad now and then.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check