what size for an icp

[Lloyd Smale]

Might give casting for mine a crack. Probably go pc and a lee sizing die. What size runs well in yours? Anyone try the 105 lee swc in theres?

[Uncle Grinch]

This caught my eye because I don’t know what an icp is. Hope to get educated.

[hd09]

worked good in a ruger lcp. no problems. used ben's red tried .356 and .357 no leading either one.

[jcren]

My tcp works well with the Lee 95 rf. The short cycle is pretty oal sensitive.

[Hickory]

This caught my eye because I don’t know what an icp is. Hope to get educated.

You need a secret decoder to decipher abbreviations here at Castboolits.
The decoder is so secret that I only think it exists. If you fkn you mfio.

[runfiverun]

icp=

[vzerone]

Well let's see if you military guys remember this code on the envelope of a letter you sent to your girlfriend back in the day.

GIHGIHGITGITGILYGIDGIHYLMT sorry Lloyd

[W.R.Buchanan]

I think it was a typo. I think he meant LCP, and in Ruger LCP.

Randy

[LabGuy]

Inductively Coupled Plasma?

[waco]

icp=

That's pretty funny Lamar. I'm surprised I even know what that is!

[Guesser]

cwileederdaygotousantbusesinnarow;nojodemsstruckss umitkowssumitdux!!

[runfiverun]

Lloyd 358 should work just fine.

[dubber123]

I shoot the LEE 95 RF at .358" from mine. A neighbor has tried the LEE 105, and says they work, but his loads show a bulge at the boolit base which I don't like.

[Lloyd Smale]

thanks. I already have a couple 6 cav 105 molds and all I can find in the round nose is 2 cav and I wouldn't waste 50 cents on a 2 cav lee mold.

Lloyd 358 should work just fine.

[Lloyd Smale]

that one interest me. At least in comes in a 6 cav. I guess I'm not going to shoot thousands of rounds through my "LCP" so I almost hate to buy another mold just for it if the 105 works. I know it runs like better in the wifes lc9

I shoot the LEE 95 RF at .358" from mine. A neighbor has tried the LEE 105, and says they work, but his loads show a bulge at the boolit base which I don't like.

[fecmech]

LLoyd--I have slugged 2 LCP barrels in the past, both were .355".

[Lloyd Smale]

LLoyd--I have slugged 2 LCP barrels in the past, both were .355".

thanks that's the info I was looking for.

[OS OK]

Inductively Coupled Plasma?

Looking at your 'Avatar' it suddenly became clear...no wonder our S&B PC'ing method sticks so well to Pb...only 4 e's in the VR !

[DerekP Houston]

I've been using the NOE 100gr 380 mold sized to 356 for my bersa thunder and lcp 2, works like a champ. I had to switch to an undersize die for jacketed, now I can load xtp and golddots without the bullet setback issue I was having before.