MidSouth Shooters SupplyRepackboxInline FabricationTitan Reloading
Load DataWidenersLee PrecisionRotoMetals2
Reloading Everything
Page 4 of 5 FirstFirst 12345 LastLast
Results 61 to 80 of 83

Thread: Small ring Mausers. Show 'em if you got 'em.

  1. #61
    Boolit Master




    EMC45's Avatar
    Join Date
    Jun 2007
    Location
    East TN Mountains...Thanks be to God!
    Posts
    4,549
    Quote Originally Posted by oldhenry View Post
    They are all Carl Gustafs. The straight handle one with the sling & the turned down one are dated 1901. The straight handled one w/o a sling is dated 1908.

    They are so long that good photos are beyond my talents.

    The turned down bolt specimen is not a Frankenstein: the bolt # matches with the receiver#. I don't know how rare they are......I do know that you don't see very many. It is all original.

    The straight bolt rifles have been used in CMP competition & the OEM front sight blade has been removed (they shoot high with the OEM blade) & replaced with a taller item that we sourced from Brownell. They are extremely accurate.

    All 3 stock discs show #1 bbl. markings.

    I tried to show better shots of the turned down bolt rifle (horizontal).

    Henry
    Did you get any of these Swedes at Perry Pawnshop?
    You can miss fast & you can miss a lot, but only hits count.

  2. #62
    Boolit Grand Master WILCO's Avatar
    Join Date
    Jan 2008
    Location
    20 minutes from a Tiki Bar!
    Posts
    6,230
    Bump to the top!
    "Everyone has a plan, until they get punched in the face!" - Mike Tyson

    "Don't let my fears become yours." - Me, talking to my children

    That look on your face, when you shift into 6th gear, but it's not there.

  3. #63
    Boolit Master Randy Bohannon's Avatar
    Join Date
    Oct 2016
    Location
    Buffalo WY
    Posts
    919
    I have exactly one, don’t know anything about it, small ring med. large ? I don’t know the difference. Whoever built this rifle was top notch in the 70’s. Beautifully polished and blued with a 22” Shilen 338-06 AI.Glass bedded and pillard ,fantastic trigger and floor plate release and trigger guard, recessed sling swivels.It does have a flaming bomb on the right side in front of the ejection cutout. It is a temperamental rifle it loves new 30-06 brass expanded, lo .338” and 52 grs of Varget and 210 gr. bullets. I get about 2 maybe 3 reloadings then misfires or just will not go bang, I have read this can be a problem with some AI chambers and Mauser actions. I do love this rifle. My elk in the timber rifle, the 338-06 is about perfect.
    Attached Thumbnails Attached Thumbnails BBF47EED-7DA4-4D38-8A9D-F44C4C1FABCC.jpg  
    Last edited by Randy Bohannon; 04-01-2020 at 07:14 PM.

  4. #64
    Boolit Grand Master WILCO's Avatar
    Join Date
    Jan 2008
    Location
    20 minutes from a Tiki Bar!
    Posts
    6,230
    Wouldn't mind seeing another picture of that one Randy.
    "Everyone has a plan, until they get punched in the face!" - Mike Tyson

    "Don't let my fears become yours." - Me, talking to my children

    That look on your face, when you shift into 6th gear, but it's not there.

  5. #65
    Boolit Master Randy Bohannon's Avatar
    Join Date
    Oct 2016
    Location
    Buffalo WY
    Posts
    919
    Try these, it’s a Argentine 1898 ? the gunsmith didn’t ruin the stampings.
    Attached Thumbnails Attached Thumbnails 76572D38-AE77-442E-AB0E-309944DB94BB.jpg   9A256AA9-E52E-4319-B934-2CBCB7BB05DC.jpg   DA87939E-966C-430B-9FC1-ED46420BD8DE.jpg  

  6. #66
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    My 1917 Carl Gustav.
    18 years ago I had owned my first Swede. I fell in love with the 6.5 cartridge and that rifle. I like their lines, how they balance in the hand, the beautiful workmanship and just holding them. And they are fun to shoot.
    Then a life style change forced the sale of it and many other nice rifles that will never be replaced. But, I kept thinking about how much I enjoyed the Swede.

    Fast forward to January, cabin fever is driving me bonkers so I took the short drive to my local stock everything, gunshop. After looking at several rifles and discussing re-barreling, I gave up on that idea as insanely expensive. Back in the corner of the mil-surp rack I spotted a decent Swede. It had a lot of battle scares on the stock, I mean lots of them. And it was greasy, I felt I needed gloves to handle it there was so much grease on it. Since it had been there for two years, they made a reasonable offer if I would take it home. It is a matching number rifle with the exception of a replacement handguard.

    Closer inspection shows no import marks. But it is cover in arsenal grease, dried, hard and yuck. No one had been shooting it for certain. But, the stock had just as much grease on it. There would be no holding and fondling this rifle until I could degrease it. And that is where the problems began. I found that Brownell's DeSolve would take most of the grease off, but not the underlying oil. The oil was as bad as the grease for leaving a sticky to the touch stock. I mentioned in another post that I was going to have to refinish the stock I you would think I had committed the one unpardonable sin. But, I wanted to enjoy my rifle, not set it in the safe and leave it for my kids to deal with some day.
    The overall condition of the wood was mostly good but, the butt was showing a lot of weather/water damage. It reminded my of many of the Swiss K-31's I had seen. And there was the battle scares, bumps, dings and dents. The stock is a light wood, probably maple, it was hard to be 100% certain. It is not walnut nor elm. After much discussion it was determined to be very common beech wood.

    Beginning with Easy Off oven cleaner and not getting good results, I finally settled on a strong degreaser for removing oil stains from concrete. It is very thin and did a great job of soaking in and raising the dents. It took three applications followed by a hot water rinse each time. The wood is now dry to the touch, no longer oily or leaving me with the need to wash my hands after handling it. But it looks splotchy, the color is uneven. I cannot put a new finish on it looking like this and I am NOT going to put a walnut oil finish on it to cover up the uneveness. I want it to look like it was intended. So, the next step was get a jug of household bleach and soak the wood. Now it is all a single color, and a new challenge was getting the stock to match the replacement handguard. After a light sanding with 320 grit, by hand, never ever use power tools to work on a stock, I found a wood stain called gunstock. from the pictures it looked like a near perfect match. One coat and yes, it is just right. Next is three coats of Old English Red Root oil, one coat a day followed by three coats of hardener and then hand rubbing it smooth with the palm of my hand. Finally I gave it a good coat of Finish, paste wax.
    After all that the stock still looks military, all the battle scars are still very visible and it is a pleasure to hold and admire.

    Did I ruin the value of my rifle as the purists claim, I think not. It looks near original, it is now a shooter as I want. It will never be less than I paid for it and I have a rifle I can pass on to my daughter when the time comes and she will know that dad loved this rifle.


    Click image for larger version. 

Name:	IMG_8695.jpg 
Views:	71 
Size:	12.8 KB 
ID:	259625

  7. #67
    Boolit Master 444ttd's Avatar
    Join Date
    Jun 2019
    Location
    PA
    Posts
    1,011
    i don't have nothing special, but here it is........

    91 sporterized argentine in 7.65x53


    husqvarna m46 in 9.3x57


    93 spanish mauser(made in 1926 by oviedo) in 7x57


    my project rifle is the m93. soon, i will have the dayton speed lock kit and the safety. it will need d&t to put on a scope base. then i'm going to a green mountain barrel in 7mm. my gunsmith will do the threading, chamber to 7x57, headspace and crown the barrel. then i'll try my hand at bluing the barrel with oxpho blue. i haven't decided on the stock but it will be a either a classic sporter or mannlicher.




    http://daytraco.com/Products/Speed-L...er__DSL93.aspx
    http://daytraco.com/Products/Mark-II...er__DMS93.aspx
    https://www.gmriflebarrel.com/rx7-27...ned-bbl-blank/
    Ad Reipublicae his Civitatum Foederatarum Americae, ego sum fortis et libero. Ego autem non exieris ad impios communistarum socialismi. Ora imagines in vestri demented mentem, quod vos mos have misericordia, quia non.

    To the Republic of these United States of America, I am strong and free. I will never surrender to godless communist socialism. Pray to images in your demented mind, that you will have mercy, because i will not.

    MOLON LABE

  8. #68
    Boolit Bub
    Join Date
    Apr 2019
    Posts
    40
    Wandering thru a gun show a couple years ago I find this Spanish M1916. Didn't know anything about Mausers, but was already set up to load .308, and looked like it would be fun to shoot against my Mosin, Enfield, and 03A3. Couldn't get on with the tiny v-notch rear sight so put a scope on it. It shoots Berry plated 150's over 2400 fairly well. Had my cataracts out so might try those iron sights again. At $250 all in it's provided some cheap entertainment.
    Attached Thumbnails Attached Thumbnails IMG_1090.jpg  

  9. #69
    Boolit Master
    Join Date
    Dec 2009
    Location
    Western Colorado
    Posts
    663
    got two small rings, spanish FR-7 and a 1916 both chambered in 7.62x51 both still wear the orig wood, mounted a pistol scope on the 1916 and havn't got to shoot it yet. the FR-7 is very accurate with the Iron sights. can't post pic's, can't figure out on how to hook browne box camera to the computer.

  10. #70
    Boolit Man Bouteselle's Avatar
    Join Date
    Jan 2020
    Location
    South of France
    Posts
    91
    Few years ago I found this sporter, built 8x57 first trimester 1914.
    G98 barrel slightly shortened, unfortunately reblued, Gerard scope, now 8x60S.
    It seems sporter carbines were used by both sides in ww1, as you can see on this pic from the movie "All quiet on the western front".

    Click image for larger version. 

Name:	Mauser.jpg 
Views:	47 
Size:	136.8 KB 
ID:	259758

    Click image for larger version. 

Name:	Mauser2.jpg 
Views:	57 
Size:	89.5 KB 
ID:	259759

    Click image for larger version. 

Name:	500px-AQ_Sniper_2.jpg 
Views:	50 
Size:	60.6 KB 
ID:	259757

  11. #71
    Boolit Master AntiqueSledMan's Avatar
    Join Date
    Feb 2011
    Posts
    516
    Hey Guys,

    Here is my 1891 Argentine, still in 7.65x53 with Weaver Mounts & Weaver K4 Scope, cut & welded Bolt Handle. When I purchased it had a broken Firing Pin, which cost more to replace than I paid for the rifle. Birth date unknown as Crown is ground off, numbers did match before my Gunsmith screwed up the receiver and had to replace it with another.

    And my 1902 Model 38 Swede, still in 6.5x55 with Weaver Mounts & Tasco World Class 3-9x50 Scope, cut & welded Bolt Handle, threaded portion of muzzle faced off & crowned, set in a Ram-Line Composite Stock. This one must have been re-worked at one time as the Barrel was shortened but it still had the straight Bolt Handle, all numbers match. I refer to this as my "Black Military Type Rifle", I do carry it Deer Hunting and love how it shoots.

    AntiqueSledMan.
    Attached Thumbnails Attached Thumbnails 1891-1.jpg   1891-2.jpg   Swede-1.jpg   Swede-2.jpg  

  12. #72
    Boolit Master
    Join Date
    Sep 2010
    Posts
    1,606
    it is still a beautiful piece.

  13. #73
    Boolit Buddy
    Join Date
    Mar 2016
    Location
    Logan, Ut.
    Posts
    494
    Did I ruin the value of my rifle as the purists claim, I think not. It looks near original, it is now a shooter as I want. It will never be less than I paid for it and I have a rifle I can pass on to my daughter when the time comes and she will know that dad loved this rifle.


    Click image for larger version. Name: IMG_8695.jpg Views: 15 Size: 12.8 KB ID: 259625



    make sure you pass off that wonderful "History" to your daughter before it's lost.
    Good Judgment comes from Experience, Experience comes from Bad Judgment !

  14. #74
    Boolit Grand Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    5,253
    .

    Here's the S&W Model D, based on the Small Ring Mauser 98 action by Husqvarna, aka the Husqvarna Model 1640.


    Now I lay me down to sleep
    A gun beside me is what I keep
    If I awake, and you're inside
    The coroner's van is your next ride

  15. #75
    Boolit Bub CA Dude's Avatar
    Join Date
    May 2007
    Location
    Bigelow, AR
    Posts
    53
    Click image for larger version. 

Name:	Spike Camp.jpg 
Views:	39 
Size:	67.2 KB 
ID:	259808

    93 Mauser, chambered in 8mm IHMSA. A Spike Camp stock from Boyd's.

  16. #76
    Boolit Master Randy Bohannon's Avatar
    Join Date
    Oct 2016
    Location
    Buffalo WY
    Posts
    919
    Pietro that’s a simply elegant rifle I want one of those and don’t care what it’s chambered for.

  17. #77
    Banned
    Join Date
    Jan 2011
    Posts
    186

  18. #78
    Boolit Grand Master WILCO's Avatar
    Join Date
    Jan 2008
    Location
    20 minutes from a Tiki Bar!
    Posts
    6,230
    Came back here because I'm in another small ring mood.
    "Everyone has a plan, until they get punched in the face!" - Mike Tyson

    "Don't let my fears become yours." - Me, talking to my children

    That look on your face, when you shift into 6th gear, but it's not there.

  19. #79
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,335
    Yall have seen her before, but she just got a new 45 year old K4 that just seems to be just right. She has decided that she doesn't care about the lube vs. PC drama- they taste the same.

    Sent from my SM-A716U using Tapatalk

  20. #80
    Boolit Buddy Hdskip's Avatar
    Join Date
    Jan 2016
    Location
    Central Virginia
    Posts
    195
    Click image for larger version. 

Name:	denny3.jpg 
Views:	35 
Size:	53.5 KB 
ID:	272519Click image for larger version. 

Name:	denny4.jpg 
Views:	31 
Size:	52.3 KB 
ID:	272520Click image for larger version. 

Name:	denny1.jpg 
Views:	36 
Size:	74.5 KB 
ID:	272521
    I redid this early sporter job for a friend. Rifle had a Remington take off barrel re-threaded and chambered in .250 savage and an early Reinhart Fajan sporter stock. The barrel was replaced with a Douglas XX and chambered in the same .250 Savage. I reshaped the stock and replaced the fore-end cap and pistol grip cap with Rosewood. A hand-rubbed oil finish was applied . The owner was pretty happy and reported very good groups with it. This would be a pretty nice walking around rifle. It was hard to give it back......

Page 4 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check