32 ACP mould for Walter PP & PPK

[hunter74]

I'm looking for a good boolit for 32 ACP for the old autos, especially the Walter pistols.

I've looked at the Magma 78 gr RN. Is this a good boolit for these old autos? I guess a boolit around 80 gr would be about right....

Thanks

Sent fra min SM-G930F via Tapatalk

[pworley1]

I use the Lyman 311252 and 313249 with my Walther pp's with very good results.

[Jeff Michel]

311252 for plinking and the 325 saeco for more serious applications

[Finster101]

You could see if Grey Wolf might make you a batch. I purchased some from him quite some time ago so I don't know if he is still up to it but they were very nicely done.

[Outpost75]

Real German Walther PP with original magazines will feed flatnosed bullets reliably.

These are the ones I use in mine:

Attachment 210760Attachment 210761

And these are the loads:

.32 ACP Hand Loads Min. OAL 0.945,” Max. 0.965", Starline, RWS or Fiocchi cases averaging not more than 40 grains empty weight, Winchester SP primer.

“Group 1” Loads▪ which don’t exceed factory energy, suitable as a "steady diet" for use in Tomcat and Keltec pistols:

Ammunition _Little Dandy Rotor#___Beretta Tomcat 2.4”____Beretta M1935 3.4”

Acc. 31-077B LD#00 2.0 TiteGroup__790, 12 Sd_________893, 19 Sd
Acc. 31-077B LD#0 2.2 Bullseye____757, 16 Sd_________932, 24 Sd
Acc. 31-077B LD#1 2.5 Bullseye____835, 16 Sd_________956, 18 Sd
Acc. 31-077B LD#0 3.0 AutoComp__837, 10 Sd_________957, 16 Sd

Acc.31-090B LD#00 2.5 AutoComp__729, 11 Sd________833, 6 Sd


“Group 2” +P Loads which exceed “average factory energy” intended for steel frame guns only!
Substitution of standard .32 ACP recoil spring with .380 replacement is recommended.

Ammunition __Little Dandy Rotor#_____Beretta M1935 3.4”

Accurate 31-077B LD#7 5.6 #2400+P_____998, 22 Sd
Acc. 31-077B LD#4 3.0 Unique_+P_______1067 fps, 19 Sd*

Acc. 31-090B LD#0, 2.2 Bullseye______851, 14 Sd
Acc. 31-090B LD#2, 2.5 Unique+P______901, 33 Sd
Acc. 31-090B LD#00 2.0 Titegroup_+P___902, 16 Sd
Acc. 31-090B LD#0, 3.0 AutoComp+P+__999, 14 Sd, replace recoil spring with .380 ACP spring!

[Reverend Al]

The RCBS 77 grain bullet works fine in my various .32 autos including a PPK and an HK4 ...

[Bigslug]

NOE still has some Ranch Dog tumble lube molds in inventory from the group buy we put together a few months back: http://noebulletmolds.com/NV/index.p...8l7fseqigqqpe6

[Bzcraig]

I used the Lyman 311252 as well which is now for sale

[Boolseye]

+1 on the NOE/RD TLC314-75-RF.

[hunter74]

Thank you for many good suggestions. I'll be using my Bullet Master for this bullet so I'll se what accuratemolds.com can make me or simply order from Magma.

I see that many of the suggestions are very similar so I can't se why not most of them would work.



Sent fra min SM-G930F via Tapatalk