300 B/O AR15 SBR question

[lucifers]

- Want a 300 B/O

- Have GEMTECH 1 can

- Putting the can on a 16" bbl is unwieldy.

- IF you welded an open ended tube on a 10.5 bbl to bring the OAL to 16" would that be considered a 16" bbl ?

- Thinking if it's ok, I could do that with a tube large enough to install the can inside the tube on the short bbl.

Thoughts ?

[KMac]

Tactical solutions makes a 300 BO upper like what you are talking about. Permanently attached shroud that makes it legal length.
https://www.tacticalsol.com/tsar/300-upper

[lucifers]

Thanks but 1200 bucks for a $400 upper is a bit much.

[KMac]

I️ agree with that. I️ was just showing that it could be done.



Sent from my iPhone using Tapatalk Pro

[lucifers]

Thanks. Maybe I'll go to NAPA and look at exhaust pipes------

[wlc]

IF you go the home made route I'd suggest that you weld the "exhaust pipe" to a flash hider then blind pin the flash hider to the barrel. Less heat on the barrel, less chance of warping something and ruining your barrel.

[Texas by God]

As long as your extension tube is "permanently" attached and the OAL is 16"- you are good.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[vzerone]

Thanks. Maybe I'll go to NAPA and look at exhaust pipes------

Now that is hilarious!!! Not saying it wouldn't work, just made me laugh is all.

[lucifers]

Well just sold a $1000 rifle on GB, so I can afford the TACSOL upper.

It is such a cool solution to putting another thumb in the eye of the deep state.

My GEMTECH ONE will slip right in the bbl extension. Watched the videos ---- quiet !

Many potential applications --------