I have two Lee Pro A-D powder measures and they have been fine loading Bullseye 3.0 to 5.0 pistol loads with my Lee 1000 presses. Now I am wanting to set up a Lee Turret press to load .351WSL. After trying 17.0gr load of both 2400 and IMR4227, I cannot get that Lee measure to throw accurate charges for anything. My powder drops vary + or - as much as one half grain. I have tried both measures with both the fixed disks and the adjustable disk with no success. During my testing, I tried the same loads with my RCBS Uniflow and all is well, it will drop the desired charge every drop. Is it normal for the Lee to act this way? Also, is there a die made that I can adapt my Uniflow to the Lee Turret? /Chris