Looking for a light Keith style bullet.

[gilgsn]

Hello,

I have the RCBS 45-270-SA mold and really like it. I would like however to find a light Keith style bullet, or at least something with a wide flat nose in the 200 to 230gr range with a wide lube groove for BP, in .454... Any suggestions? Thanks!

Gil.

[runfiverun]

you'll look long and hard for the lyman version designed for the 45 auto rim cases.
I'd just order one of these.

http://noebulletmolds.com/NV/images/...PB)_Sketch.Jpg

[gwpercle]

I accidentally stumbled onto the Lyman version a few years ago....but discontinued designs are hard to find and most want more than I'm willing to pay.
The NOE 452-231-SWC PB is a recreation of the Lyman and probably drops larger than .452.
The NOE store says 2, 3, and 4 cavity moulds are in stock.
Christmas present ?
Gary

[gilgsn]

Thanks guys, nice NOE mold. I like their 453-238-HP, but a bit expensive..
Gil.

[waco]

Thanks guys, nice NOE mold. I like their 453-238-HP, but a bit expensive..
Gil.

Gil. As with most things in life. You get what you pay for. Buy once, cry once.
Waco

[Geezer in NH]

A light Keith bullet? isn't that an oxymoron? By caliber Keith's were heavy IMHO.

Shapes like Kieths but light are new maker renditions.

[Leadmelter]

NOE is running its End of the Year sale for the next week. Should take a little sting out of the wallet. I think it is 20% off.
Leadmelter
MI

[Minerat]

If you are on the email list then you know NOE has a 20% off sale for the entire site till 12/8/17 right?

[USSR]

Here you go, designed by Elmer Keith himself. Weighs between 220gr and 237gr, depending upon the alloy and whether you cast it as a solid or hollowpoint.



Don

[Leadmelter]

http://noebulletmolds.com/NV/images/...PB)_Sketch.Jpg
I did not see this mould on website. Special order ?
Leadmelter
MI

[KCSO]

I have a Lyman 200 grain full wadcutter.

[45-70 Chevroner]

Lyman has a Keith style 200gr. Number 452460. It looks like a traditional Keith SWC but shorter. It has two groves.