.........32-20 dies for the 310 tool? I don't find them listed in the usual charts, and it might be nice to have a set for my S&W.
.........32-20 dies for the 310 tool? I don't find them listed in the usual charts, and it might be nice to have a set for my S&W.
Number 29 are the .32-20 sets.
yes, you want a set? hope your not in a rush, will be somewhat a made up set
FWIW, because you are neck sizing only, you can also use an M-1 Carbine set. In fact, IIRC, the die code number may even be the same, but regardless, I’m about 98% sure it works that way. Time to check the old list on Cast Pics.
Froggie
"It aint easy being green!"
Ah ha! Got it......somehow I expected it to be under the rifle calibers. Completely overlooked the pistol dies......
Yes, because I have a set in the next room, and no, you can't have it! Bought it off eBay years ago.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I have a couple of .30 Carbine sets, supposedly they will do for .32-20 but there is a difference of about .010 at the mouth of the case.
On the list I have the 32-20 uses a S handle, #3 adapter, #19 priming chamber, 329 muzzle or d/a chamber, with .311 expander.
30 carbine uses S handle, #15 adapter, #23 primer, #29 muzzle-D/A, .309 expander.
So yes the 30 carbine can be used but need a .311 expander, priming chamber and adapter.
I've seen all of these listed on Ebay at times.
Leo
I think the 32/20 uses the #10 priming chamber, same as 218b and 25-20 -- #19 is for the 32 S&W
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |