375 300 grain

[dakota]

who makes a mold for 375 with cast bullets in the 300 grain range -- Preferably with gc's, flat nose?

[KMac]

Here is one at Accurate Molds.

[dh2]

I have the Accurate mold for it, and have cast some but never tried to load them. I caught the mold on a sale and still want to try it, but for years now my 375 H&H Mag. has been doing good with Lyman 264 gr.

[Moonie]

Accurate makes great molds for 375, I have one that looks similar to this one but at 335gr.

[runfiverun]

saeco makes 2, one at 300 and one at 315 both plain base.
somewhere I have a mold with both cut in it set-up for the master caster.

[dakota]

Thanks. It looks like I'll be looking for an Accurate mold. That design looks perfect for my 375 Whelen AI.

[dakota]

I'll be looking at Saeco too.

[runfiverun]

Lyman makes a 375449 it's more like 275 grs but is a very good design in the 375 H&H and the 375 Winchester also.
it is a gas check design, mine makes 379 barely but is what I size to anyway.

[beagle]

NEI makes several and I had a double cavity made. #185 and #187. One is a spire point and the other is a flat nose. If you can get a good mould from NEI, I recommend them. The flat nose did well in Africa as I sent a batch to a pal in Namibia. His father killed two eland with one shot (one behind the other). The blunt nose completely penetrated the first and killed the second behind it. That was in the .375 H & H. It did really well in my Number 1 Ruger .375 H & H./beagle

[5Shot]

NEI makes several and I had a double cavity made. #185 and #187. One is a spire point and the other is a flat nose. If you can get a good mould from NEI, I recommend them. The flat nose did well in Africa as I sent a batch to a pal in Namibia. His father killed two eland with one shot (one behind the other). The blunt nose completely penetrated the first and killed the second behind it. That was in the .375 H & H. It did really well in my Number 1 Ruger .375 H & H./beagle

NEI is out of business, as Joel recently passed.

[beagle]

Thanks. Hadn't heard that. Anyone picking up the reins and designs?/beagle

NEI is out of business, as Joel recently passed.

[5Shot]

Thanks. Hadn't heard that. Anyone picking up the reins and designs?/beagle

Website just says "Out of Business" - it just happened, so I am sure it will be a while before they get squared away.