The Gun Clinic Priming MACHINE

[15meter]

Found this several years ago while wandering the vendors at Camp Perry.

I have not found a single reference to it online, very cool, very, very well built machine. It is in almost new condition for being 40+? years old.
I have not used it yet. It takes square primer feed tubes. It took a little while to find the (almost) right size tubes.


The shell holder in the front is marked 30-06 H&H. Held on with 4 screws.

[tja6435]

Nice, that looks like it'll hold up very well

[Pressman]

15 Meter, it's nice to see another one. I have never tried to use mine either though it looks to be very well made. I think the Bonanza primer tubes will work.

Ken

[salpal48]

I have 2 . It was one of best Off press priming tool made.. The square tube . still can be purchsed At hobby store If you Know what to look For.
Shell holders are a problem. I have several. But Finding Them are difficult.
Sal

[15meter]

I have 2 . It was one of best Off press priming tool made.. The square tube . still can be purchsed At hobby store If you Know what to look For.
Shell holders are a problem. I have several. But Finding Them are difficult.
Sal

I ended up getting the primer tubes @ an R/C store. I have a RCBS bench primer that I use all the time, that is absolutely cheesy in comparison to this thing.

Guess I should set it up and try it sometime, I load multiple .473 case head calibers and both 300 and 375 H&H calibers.

I only have the one shell holder, not sure where to even look to find any other sizes.

This is the only place that I have seen that even recognizes the press.